Airsoft Canada

Airsoft Canada (https://airsoftcanada.com/forums.php)
-   Gear Discussion (https://airsoftcanada.com/forumdisplay.php?f=26)
-   -   FYI: G&G CM16 SRS dead gun fix. (https://airsoftcanada.com/showthread.php?t=226967)

swiftgruve May 4th, 2021 09:18

FYI: G&G CM16 SRS dead gun fix.
 
Not sure what the specific term is for this (I call it dead gun), but my G&G CM16 SRS was constantly shutting down if I was firing it intensively. I thought it was the connector, so I converted it to Deans. No luck. Finally I swapped it over to LiPo batteries and voila, it works. Turns out, the NiMH battery's voltage was dropping and the mosfet thought it was dead.

The moral of the story: If you have one of these (or any other G&G built-in mosfet probably), don't bother with NiMH. Go straight to LiPo.

Styrak May 30th, 2021 23:43

Yes, this is well known. They worst best with 11.1v lipo.


All times are GMT -4. The time now is 05:37.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.