Airsoft Canada
http://www.ultimateairsoft.ca/

Go Back   Airsoft Canada > Information Center > Newbie Tank
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

curved bullets

:

Newbie Tank

Closed Thread
 
Thread Tools Search this Thread
Old July 30th, 2009, 09:14   #1
Improboblygonnaneedhelp
 
Join Date: Jun 2009
curved bullets

ok i just got my well mb05 and i assembled it out of the box and loaded it with .25 gram bbs i adjusted the hop up to around 60 percent turned and when i shoot it curves EXTREMELY sharpely to to the right what is wrong with the gun?
Improboblygonnaneedhelp is offline  
Old July 30th, 2009, 10:37   #2
McKay
 
McKay's Avatar
 
Join Date: Jun 2007
Location: Winterpeg the frozen hell hole
Send a message via MSN to McKay Send a message via Yahoo to McKay
Hop up could be a little too tight, try toning it down.
__________________
Proud owner of the FA36-74u
XBL Gamer Tag: Knightly McKay
McKay is offline  
Old July 30th, 2009, 11:02   #3
Donster
 
Donster's Avatar
 
Join Date: Jul 2007
Location: Ontario
the actual hop-up rubber itself could be off center. this would cause your shots to do that.
__________________
(SFW:Check out this band!)www.myspace.com/maryroseobsession
Donster is offline  
Old July 30th, 2009, 11:20   #4
AngelusNex
formerly Sepulcrum
 
AngelusNex's Avatar
 
Join Date: May 2007
Location: Kingston,ON, aka Funkasia
Send a message via MSN to AngelusNex
inner barrel/hopup could be twisted or hop up rubber alone could be twisted and/or misshaped.
AngelusNex is offline  
Old February 16th, 2010, 06:10   #5
Michael Roberts
 
Join Date: Feb 2010
Quote:
Originally Posted by Donster View Post
the actual hop-up rubber itself could be off center. this would cause your shots to do that.
I have the same problem as him, regarding the hop up how would i fix it
Michael Roberts is offline  
Old February 16th, 2010, 08:52   #6
rokor
 
Join Date: Nov 2009
Location: Mississauga, Ontario
Quote:
Originally Posted by Michael Roberts View Post
I have the same problem as him, regarding the hop up how would i fix it
See the two previous posts above yours. Try adjust the angle of your hopup.
rokor is offline  
Old February 16th, 2010, 09:23   #7
CDN_Stalker
Official ASC Bladesmith
 
CDN_Stalker's Avatar
 
Join Date: Jul 2003
Location: Ottawa, Ont.
Send a message via MSN to CDN_Stalker
I'll say too much hop up, too light BBs. Hop has to be adjusted outside at a minimum of 100ft, so likely wind is an issue as well as overhop. Turn down the hop up to around 20% and work your way up. Can't preset the hop up and expect it to be right on.
CDN_Stalker is offline  
Old February 16th, 2010, 09:54   #8
Strelok
 
Strelok's Avatar
 
Join Date: Jun 2006
Location: Brandon Manitoba
Thank god this isn't about that movie Wanted. Haha.

Yeah, This problem isn't exactly new. My own Well VSR does this too, and i'm sure its because of a faulty barrel. The guns simply weren't good to begin with i'm afraid.
Strelok is offline  
Old February 16th, 2010, 09:58   #9
TokyoSeven
Red Wine & Adderall
 
TokyoSeven's Avatar
 
Join Date: Oct 2005
Location: Saskatoon, SK
Maybe you have the same problem because you are the same person as the original poster.
A quick IP address comparison confirms so.



Duplicate accounts are not allowed.
__________________


"Its only a little bit on fire"
TokyoSeven is offline  
Closed ThreadTop


Go Back   Airsoft Canada > Information Center > Newbie Tank

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://www.ultimateairsoft.ca/

All times are GMT -4. The time now is 13:31.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2017, vBulletin Solutions, Inc.