Airsoft Canada

Go Back   Airsoft Canada > Information Center > Newbie Tank
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Bushing sizes?


Newbie Tank

Thread Tools Search this Thread
Old July 13th, 2009, 23:27   #1
Join Date: Oct 2008
Location: Ottawa, ON
Bushing sizes?

What's the difference between 6,7 and 8mm bushings (apart from the actual size)? I understand what a bushing is and what they do, but are certain guns size-specific? Do the different sizes actually accomplish anything other than just being different sizes?
mattman2523 is offline   Reply With Quote
Old July 14th, 2009, 08:23   #2
m102404's Avatar
Join Date: Apr 2006
Location: Toronto
Different brands use different size bushings/bearings. Even within some manufacturers, similar models use different size bushings/bearings in gen1, gen2, gen3, etc... (i.e. first G&G M4's might have used 6mm...then 7mm in the next revision...then 8mm..)

I'm not 100% sure on this...but I think there have been mechboxes where 4 of the 6 bushings were one size and 2 of them were another. Really not sure on that...I might be completely wrong.

At any rate, IMO the general thought is a solid metal bushing is more robust than bearings or a plastic bushing. A lot of bearings are now 7mm and 8mm (and I think there's a 9mm as well). The smaller 6mm bearings had a bad rep of not holding up with a lot of use. Wear/tear and heat build up are killers. Bearings do run smooth though.

Now...I personally don't see the point of bigger and bigger solid metal bushings...other than to replace larger bearings.

Most good ones and put them into a solid good mechbox shell. There's no point in buying cheap bushings and putting them into a cheap shell...just to have them rattle around (I've seen plenty where the bushings didn't fit tight in the shell and you could actually see it move around in the hole).

Also, with buying cheap ones you have no idea how they will stand up to wear. Metals can be soft or hard...and you definitely want precisely sized hard metal bushings....otherwise don't bother.

Best of luck,

m102404 is offline   Reply With Quote

Go Back   Airsoft Canada > Information Center > Newbie Tank


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Airsoft Canada

All times are GMT -4. The time now is 11:00.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.