Airsoft Canada
www.jsairsoft.com

Go Back   Airsoft Canada > General > General
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Speedloaders

:

General

Reply
 
Thread Tools Search this Thread
Old July 10th, 2009, 01:23   #1
Evans
 
Evans's Avatar
 
Join Date: Aug 2006
Location: Calgary, Alberta
Speedloaders

I am making this thread because I am looking for a speedloader that does not jam constantly. So far, every speedloader I have used has not liked me very much and jammed after 2 or 3 uses and it takes some fiddling in order to get it working properly again.

Basically, I am looking for a speedloader that can empty itself in one go without an error. I have looked around a bit and none are cheap except for the chinese ones (I have heard many stories about these, so I stay away from them). Is there any brand to stay loyal to when it comes to speedloaders?
Evans is offline   Reply With Quote
Old July 10th, 2009, 01:23   #2
theguy
 
theguy's Avatar
 
Join Date: Jun 2008
Location: Waterloo, ON.
Tokyo Marui.
__________________
Quote:
It's better to light a candle, than to curse the darkness

Chinese proverb
theguy is offline   Reply With Quote
Old July 10th, 2009, 01:25   #3
HaloSix4
aka Halo64
 
HaloSix4's Avatar
 
Join Date: Jul 2007
Location: Uxbridge, ON
Send a message via ICQ to HaloSix4 Send a message via MSN to HaloSix4
I have not had a problem with my Vanaras ones, but that is just me. http://www.rsov.com/index.php?target...roduct_id=2429
__________________
Code:
Medgear Development Inc™ :: Custom design and manufacturing
For your Custom Gear
Saving Time By Design 
Medgear@powergate.ca
HaloSix4 is offline   Reply With Quote
Old July 10th, 2009, 01:28   #4
Evans
 
Evans's Avatar
 
Join Date: Aug 2006
Location: Calgary, Alberta
Quote:
Originally Posted by Halo64 View Post
I have not had a problem with my Vanaras ones, but that is just me. http://www.rsov.com/index.php?target...roduct_id=2429
When it says "pistol magazine shaped" does it mean it's meant for pistol mag loading? Because that looks nothing like a pistol mag to me.
Evans is offline   Reply With Quote
Old July 10th, 2009, 01:35   #5
L473ncy
 
L473ncy's Avatar
 
Join Date: Oct 2004
Location: 11-30-24-1W5
You know how there's "Magazine shaped" bb loaders? Well this is kind of like the "Pistol shaped" ones that you see except theres this weird extension thing. "Pistol shaped" being defined as like the $8 ones that Capital Airsoft sells.
__________________
ಠ_ಠLess QQ more Pew Pew
READY TO >> RACE
L473ncy is offline   Reply With Quote
Old July 10th, 2009, 01:38   #6
HaloSix4
aka Halo64
 
HaloSix4's Avatar
 
Join Date: Jul 2007
Location: Uxbridge, ON
Send a message via ICQ to HaloSix4 Send a message via MSN to HaloSix4
Ya, it works for all mags, it comes with the pistol mag adapter
__________________
Code:
Medgear Development Inc™ :: Custom design and manufacturing
For your Custom Gear
Saving Time By Design 
Medgear@powergate.ca
HaloSix4 is offline   Reply With Quote
Old July 10th, 2009, 01:48   #7
Styrak
 
Styrak's Avatar
 
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
I had a King Arms one that worked well for 2 years then broke.

TM probably makes the best one, and I have one of those now (M4 mag shaped 400-and-some round one)

If you buy a cheap one, you'll get cheap results.
__________________

Airsoft Sales and Repair/Upgrade Services
Styrak is offline   Reply With Quote
Old July 10th, 2009, 01:57   #8
Amos
 
Amos's Avatar
 
Join Date: Aug 2006
Location: Tokushima, Japan
Send a message via MSN to Amos
Quote:
Originally Posted by Styrak View Post
I had a King Arms one that worked well for 2 years then broke.

TM probably makes the best one, and I have one of those now (M4 mag shaped 400-and-some round one)

If you buy a cheap one, you'll get cheap results.
This is the one situation that I beg to differ.

I've had all brands, KA, TM, chinese all that...

From what I've found, BB click loaders are damn near throw-away items... so I'd recommend buying a cheap one over one of the more expensive ones (I got a KA loader that was broken out of the package, my TM loader lasted 2 scrims... and I've been using 2 cheap chinese click loaders for the past 3 months without any problems..)
__________________
Custom Builds:
FA3674U
Krinkov
G3SD6
Amos is offline   Reply With Quote
Old July 10th, 2009, 01:58   #9
TokyoSeven
Red Wine & Adderall
 
TokyoSeven's Avatar
 
Join Date: Oct 2005
Location: Saskatoon, SK
I have Been using Tokyo Marui for years without issue (approx $8 from over seas), well thats not true. Physically and mechanically the pistol mag sized loaders work fine for me. My issue is that I keep losing them all the bloody time. However even with each and every new one that I have purchased I have never had an issue with them.
__________________


"Its only a little bit on fire"
TokyoSeven is offline   Reply With Quote
Old July 10th, 2009, 02:02   #10
Amos
 
Amos's Avatar
 
Join Date: Aug 2006
Location: Tokushima, Japan
Send a message via MSN to Amos
I must've just got a screwed up TM loader then...

I'll have to buy a new one.. and make sure I don't lose it.
__________________
Custom Builds:
FA3674U
Krinkov
G3SD6
Amos is offline   Reply With Quote
Old July 10th, 2009, 02:28   #11
Stupideye
 
Stupideye's Avatar
 
Join Date: Aug 2007
Location: Winnipeg, Manitoba
I have a King Arms loader, as does my firend, and they work really well without any problems. We've had them for maybe 3 - 4 months or so.
Stupideye is offline   Reply With Quote
Old July 10th, 2009, 02:57   #12
Styrak
 
Styrak's Avatar
 
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
Quote:
Originally Posted by Amos View Post
This is the one situation that I beg to differ.

I've had all brands, KA, TM, chinese all that...

From what I've found, BB click loaders are damn near throw-away items... so I'd recommend buying a cheap one over one of the more expensive ones (I got a KA loader that was broken out of the package, my TM loader lasted 2 scrims... and I've been using 2 cheap chinese click loaders for the past 3 months without any problems..)
To tell you the truth I do have a chinese pistol-mag type loader that works great, but I've only used it for like a month or two. Only time will tell if it's actually durable.
__________________

Airsoft Sales and Repair/Upgrade Services
Styrak is offline   Reply With Quote
Old July 10th, 2009, 03:04   #13
Chingyul
 
Join Date: Dec 2001
Location: Calgary, Alberta
I got a King Arms and a generic pistol-shaped loader.
The generic on misfeeds all the time, but the King Arms one has been running well.
__________________
Archived Buy/Sell Rating
Chingyul is offline   Reply With Quote
Old July 10th, 2009, 03:05   #14
Sicyon
 
Join Date: May 2008
Location: Surrey, BC
I've had a king arms one for over a year now, and I've never had any problems with it
Sicyon is offline   Reply With Quote
Old July 10th, 2009, 04:27   #15
Con Murder
 
Con Murder's Avatar
 
Join Date: May 2009
Location: Lethbridge Alberta Canada
I took an old clearsoft 'm4' mag and just painted and hollowed it out. Sure its dump it all at once style only works for hicaps but thats what I'm doin.
__________________
Con Murder
Dark Rhino
L.A. Airsoft
Con Murder is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > General > General

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
www.jsairsoft.com

All times are GMT -4. The time now is 22:15.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2017, vBulletin Solutions, Inc.