Airsoft Canada
MILSIG

Go Back   Airsoft Canada > Information Center > Newbie Tank
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Help, Tokyo Marui P90 cant fire

:

Newbie Tank

Reply
 
Thread Tools Search this Thread
Old May 23rd, 2009, 17:57   #16
WANDERER671
 
WANDERER671's Avatar
 
Join Date: May 2009
Great, thanks now that may actually be the problem. hmm I guess Im gonna start studying the manual to figure the mechbox out. Ive got to learn that some time and it might as well be now, eh.
WANDERER671 is offline   Reply With Quote
Old May 23rd, 2009, 18:12   #17
CJay
 
CJay's Avatar
 
Join Date: Oct 2008
Location: Belle River, ON
Quote:
Originally Posted by WANDERER671 View Post
Great, thanks now that may actually be the problem. hmm I guess Im gonna start studying the manual to figure the mechbox out. Ive got to learn that some time and it might as well be now, eh.
Well good luck my friend, one piece of advice about the V6 - when you have removed all the screws...stick a screwdriver down the back where the threaded hole is on the back of the spring guide and hold it firmly...i didn't do this the first time and ended up with a spring guide almost lodged in me nostril haha! if u got the driver in there to control the arcing of the spring it goes much more smoothly as your pulling the 2 sides of the box apart. like i said just a suggestion and u can use whatever u like as long as its the right size and works

also it's better to open it with the nozzle facing towards the right side with the motor at the bottom. alot of the little bits that like to escape are seated using the left half of the frame so that just stops them from going everywhere when u get the box open. Also don't lose or reorganise the shims on the gears...the rest is just common sense and good tech sense so have fun
__________________
"Creator of the Zombat Sniper - oh yeah baby"
CJay is offline   Reply With Quote
Old May 23rd, 2009, 22:10   #18
Dart
 
Dart's Avatar
 
Join Date: Apr 2009
Location: Grande Prairie Alberta
on a side note, I have read that its not recommended to unwind your hicaps the way you did. The springs can come unwound very easily in the p90 hicaps.


Doesn't seem to be your problem but just food for thought.
Dart is offline   Reply With Quote
Old May 24th, 2009, 10:56   #19
WANDERER671
 
WANDERER671's Avatar
 
Join Date: May 2009
Thanks Again CJay on the tech info. Hopefully I wont loose an eye opening the mech box eh. I will keep your suggestions in full consideration thanks again. Dart, thanks for that food for thought. I had a feeling doing that wasnt actually a good thing, but I needed to test it one way or another. Ill keep that in mind.
WANDERER671 is offline   Reply With Quote
Old May 25th, 2009, 09:12   #20
WANDERER671
 
WANDERER671's Avatar
 
Join Date: May 2009
the verdict is in. with all your help, i was able to disassemble the mechbox with quite some ease and found the tappet plate to be broken in half at the opposite end of the nozzle. hence, the reason why it fails to retract when the trigger is pulled. i found a replacement tappet at a local airsoft dealer for under $10. thanks everyone!
WANDERER671 is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Information Center > Newbie Tank

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
MILSIG

All times are GMT -4. The time now is 18:26.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2017, vBulletin Solutions, Inc.