Airsoft Canada
www.jsairsoft.com

Go Back   Airsoft Canada > Information Center > Newbie Tank
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Problems with KJW G32c

:

Newbie Tank

Reply
 
Thread Tools Search this Thread
Old May 10th, 2009, 17:41   #1
Endus
 
Endus's Avatar
 
Join Date: May 2006
Location: Moosomin
Problems with KJW G32c

Im seem to have a problem with my glock, when it shoots my BB's rolls out of the chamber rather then "shoots" out. Ive field striped it and cleaned the works (gun parts and Mag). The gun runs on propane and everything looked after very well. Also ive looked at the seals and nothing is broken or loose. so what gives? did I miss something?
__________________
Tucker: [Watching the Halo 2 E3 trailer. "Bungie" appears on screen] Bungle...
Church: That's an 'I', you idiot.
Tucker: Oh! Right... Bingle...
Endus is offline   Reply With Quote
Old May 10th, 2009, 17:48   #2
Styrak
 
Styrak's Avatar
 
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
Hopup adjustment?
__________________

Airsoft Sales and Repair/Upgrade Services
Styrak is offline   Reply With Quote
Old May 10th, 2009, 17:50   #3
Erennert
A minor, using dad's ID
 
Erennert's Avatar
 
Join Date: Oct 2008
I'm don't know very much, but could it be an Air-leak resulting in no power? Is there CO2 in the mag?
__________________
Quote:
Originally Posted by Frozen Tex View Post
Is there a Cansoft Banhammer with a clear plastic shaft? And will it be compatible with full metal/wood Banhammers?

Quote:
Originally Posted by Aquamarine View Post
I'm a sniper.

Because I'm fat and can't run fast.
Erennert is offline   Reply With Quote
Old May 10th, 2009, 17:57   #4
Styrak
 
Styrak's Avatar
 
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
Quote:
Originally Posted by Erennert View Post
Is there CO2 in the mag?
It uses propane, not CO2.
__________________

Airsoft Sales and Repair/Upgrade Services
Styrak is offline   Reply With Quote
Old May 10th, 2009, 17:58   #5
Erennert
A minor, using dad's ID
 
Erennert's Avatar
 
Join Date: Oct 2008
Is there any PROPANE in the mag?
__________________
Quote:
Originally Posted by Frozen Tex View Post
Is there a Cansoft Banhammer with a clear plastic shaft? And will it be compatible with full metal/wood Banhammers?

Quote:
Originally Posted by Aquamarine View Post
I'm a sniper.

Because I'm fat and can't run fast.
Erennert is offline   Reply With Quote
Old May 10th, 2009, 18:00   #6
lemegacool
 
lemegacool's Avatar
 
Join Date: Aug 2008
Location: notre dame des prairies /quebec
remove the slide and turn up the hop up knob. to remove the slide: rack it, press the two little pins down and slide it forward
__________________

member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry
lemegacool is offline   Reply With Quote
Old May 11th, 2009, 21:01   #7
Endus
 
Endus's Avatar
 
Join Date: May 2006
Location: Moosomin
Quote:
Originally Posted by lemegacool View Post
remove the slide and turn up the hop up knob. to remove the slide: rack it, press the two little pins down and slide it forward
ok so I field-striped the gun again and cleaned up left over oil. I took a look at the hop up and cranked it from one extreme to the other. After that I returned it to normal and for some stupid reason it started to work again... does anyone know what was up with that??
__________________
Tucker: [Watching the Halo 2 E3 trailer. "Bungie" appears on screen] Bungle...
Church: That's an 'I', you idiot.
Tucker: Oh! Right... Bingle...
Endus is offline   Reply With Quote
Old May 11th, 2009, 21:14   #8
lemegacool
 
lemegacool's Avatar
 
Join Date: Aug 2008
Location: notre dame des prairies /quebec
mabe things in the hop up mechanism werent aligned properly causing it to not apply any presure on the bucking... it happens sometime on my tm deagle i just play with it and it returns to normal operation
__________________

member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry
lemegacool is offline   Reply With Quote
Old May 11th, 2009, 21:42   #9
chaosnemesis
 
chaosnemesis's Avatar
 
Join Date: Nov 2008
Location: Toronto
http://www.arniesairsoft.co.uk/revie...cat/all/page/1

"Despite all the good things about this little gun, the infamous BB rolling out of the barrel problem also remains. It seems that the rubber inside the breach is not tight enough to hold the BB in place, and once in a while, the BB in the chamber will roll out when you point the barrel down, and leaving the chamber empty. The problem happened to every KJW GBBs I ever owned, and it is not too bad in this case, and this problem in the past also seem to get better with more use. This is also the first KJW GBB I own that have adjustable hop up, and turning up the hop up a bit seems to have solved this problem."
chaosnemesis is offline   Reply With Quote
Old May 11th, 2009, 21:43   #10
Styrak
 
Styrak's Avatar
 
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
Quote:
Originally Posted by Endus View Post
ok so I field-striped the gun again and cleaned up left over oil. I took a look at the hop up and cranked it from one extreme to the other. After that I returned it to normal and for some stupid reason it started to work again... does anyone know what was up with that??
If you don't have any hop on, the force of the loading nozzle shoving the BB into the hopup will send it down the barrel, not having enough force to stop the BB in the hopup.
__________________

Airsoft Sales and Repair/Upgrade Services
Styrak is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Information Center > Newbie Tank

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
www.jsairsoft.com

All times are GMT -4. The time now is 22:43.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2017, vBulletin Solutions, Inc.