Airsoft Canada
MILSIG

Go Back   Airsoft Canada > Information Center > Newbie Tank
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

My CA G36c STILL HAS PERFORMANCE PROBLEMS!

:

Newbie Tank

Reply
 
Thread Tools Search this Thread
Old March 26th, 2009, 01:12   #1
SharksRule
 
SharksRule's Avatar
 
Join Date: Mar 2009
My CA G36c STILL HAS PERFORMANCE PROBLEMS!

I tried everything everyone told me to do to fix my problem with my CA g36c. The problem is that my g36c only shoots 4 feet and drops. It doesn't even shoot 350fps. How do I fix this? I already checked the hop-up and nothing was wrong with it.
SharksRule is offline   Reply With Quote
Old March 26th, 2009, 01:16   #2
Forever_kaos
 
Forever_kaos's Avatar
 
Join Date: Oct 2006
Location: Mississauga.
Where are you located?

Take the thing to a gun doc and he'll fix 'er up real nice. Or atleast let you know what's wrong with it.
Forever_kaos is offline   Reply With Quote
Old March 26th, 2009, 01:16   #3
yuhaoyang
asexual lumbricus terrestris
 
yuhaoyang's Avatar
 
Join Date: Jan 2009
Location: Edmonton west
Send a message via MSN to yuhaoyang
make sure the compression is correct, this includes checking the nozzle, tappet plate, piston, and piston head. Most likely problem is a broken tappet plate.
__________________
Quote:
Originally Posted by Deftonius View Post
I'll bet Ronan was the one who sent that email.
Quote:
Originally Posted by Wilson View Post
The chinese steal everything. Haven't seen an original idea come out of that country yet.
yuhaoyang is offline   Reply With Quote
Old March 26th, 2009, 01:20   #4
SharksRule
 
SharksRule's Avatar
 
Join Date: Mar 2009
First off I live in Langley BC. And how do I check the compression properly? I think its fine, but I'm not sure.
SharksRule is offline   Reply With Quote
Old March 26th, 2009, 01:21   #5
LUTNIT
 
Join Date: Dec 2005
Location: Ottawa
Broken spring, bad piston o-ring, cracked piston head, broken nozzle, leaky nozzle, bad cylinder head o-ring, cracked or broken cylinder, cracked hopup unit, burr inside barrel, torn hopup rubber, partially stripped piston or sector gear that doesn't completely cycle the piston, jammed nozzle, clog in cylinder head, and any number of countless reasons could be the cause.

We really can't help you without more information. The best answer would be to bring it to a gun doc and have them check it out. Chances are you wont be able to find out whats wrong without opening the gun and having the necessary skills to diagnose the problem.

To check the compression you need to open the mechbox, judging from how you're talking about the problem I will wager a guess that you are not experienced with gun work. Bring it to a gun doc.
LUTNIT is offline   Reply With Quote
Old March 26th, 2009, 01:21   #6
yuhaoyang
asexual lumbricus terrestris
 
yuhaoyang's Avatar
 
Join Date: Jan 2009
Location: Edmonton west
Send a message via MSN to yuhaoyang
as in when the piston moves forward, air is actually propelled out of the nozzle and hits the BB. Actually yeah, might as well take it to a gun doc, or to someone experienced and nice who will examine the mechbox for free =p
__________________
Quote:
Originally Posted by Deftonius View Post
I'll bet Ronan was the one who sent that email.
Quote:
Originally Posted by Wilson View Post
The chinese steal everything. Haven't seen an original idea come out of that country yet.
yuhaoyang is offline   Reply With Quote
Old March 26th, 2009, 01:27   #7
rustysniper
 
rustysniper's Avatar
 
Join Date: Apr 2008
Location: Canal Flats BC
check to make sure that the hop up unit is not binding in the mag well. The hop up units are spring loaded against the outer barrel and this effects both feeding and and air nozzle/hop up seal/compression Also....if the hop up bucking is protruding into the the hop up feed chamber you will also get poor feed/compression fps.
Remove the magwell.....push on the ho up unit toward the barrel and see if the spring action moves freely....and take it from there.
Hope this helps.....
PM me if you have any other questions
rustysniper is offline   Reply With Quote
Old March 26th, 2009, 01:40   #8
SharksRule
 
SharksRule's Avatar
 
Join Date: Mar 2009
Yeah thanks guys, but I just found a friend that has a hobby for fixing and upgrading airsoft guns, and hes willing to fix it for free! I took things apart and everything but my point of veiw, everything looks fine, but i'm probably wrong.
SharksRule is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Information Center > Newbie Tank

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
MILSIG

All times are GMT -4. The time now is 03:26.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2017, vBulletin Solutions, Inc.