Airsoft Canada
AirsoftParts.ca

Go Back   Airsoft Canada > Information Center > Newbie Tank
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Wise choice?

:

Newbie Tank

Reply
 
Thread Tools Search this Thread
Old February 18th, 2009, 10:26   #1
Wolf13
 
Join Date: Jan 2009
Location: Montreal
Wise choice?

At the moment my primary gun is my ics m4...
Would it be smart to add a systema hop up unit http://www.airsoftarms.com/Systema-P...te-Hop-up-unit

and the Trigger Master MkII AEG Fire Control
http://www.airsplat.com/Items/AC-UPI-TM-TRIGM.htm

Thank you in advance
Wolf13 is offline   Reply With Quote
Old February 18th, 2009, 10:34   #2
kalnaren
 
kalnaren's Avatar
 
Join Date: Dec 2006
Location: Oakville, Ontario
If it works fine, don't worry about the hop-up.

As for the trigger master, look at the advantages and decide if it's worth going through the installation hassle.
__________________

Quote:
"Someone in a Prius tried to race me at a stop sign the other day. I couldn't believe it. I had him for the first 100 feet or so but I can only walk so fast."
kalnaren is offline   Reply With Quote
Old February 18th, 2009, 10:37   #3
Wolf13
 
Join Date: Jan 2009
Location: Montreal
the hop up imo isnt very smoothe, and same with the single shot, and since i really never hold down the trigger the three shot burst will be perfect for me
Wolf13 is offline   Reply With Quote
Old February 18th, 2009, 10:39   #4
kalnaren
 
kalnaren's Avatar
 
Join Date: Dec 2006
Location: Oakville, Ontario
Quote:
Originally Posted by Wolf13 View Post
the hop up imo isnt very smoothe,
What do you mean by "smooth"? Are the shots consistent? Is there a big difference between no hop and full hop?

Quote:
and same with the single shot, and since i really never hold down the trigger the three shot burst will be perfect for me
Well, like I said, decide if the advantages is provides are worth it to you for the cost and installation effort. We can't make that decision for you.
__________________

Quote:
"Someone in a Prius tried to race me at a stop sign the other day. I couldn't believe it. I had him for the first 100 feet or so but I can only walk so fast."
kalnaren is offline   Reply With Quote
Old February 18th, 2009, 10:40   #5
Wolf13
 
Join Date: Jan 2009
Location: Montreal
i mean the shots seem pretty incosistent and i am using .25s
Wolf13 is offline   Reply With Quote
Old February 18th, 2009, 10:45   #6
CJay
 
CJay's Avatar
 
Join Date: Oct 2008
Location: Belle River, ON
I've installed 5 of those FET units and trust me - ur gonna mess it up at least once on a V2 mechbox unless ur intimately familliar with them - even then its dicey on the V2 cos u have hugely limited wiring space inside there an they can be tricky with the exess wiring u need to cram in there. I eventually found that u had to really modify the mechbox casing to remove the positioning stubs that held the wires down and even then it was a crazy tight squeeze - however saying that if its a front wired V2 its gonna be alot easier than a rear :-P

Also I'd check a couple things first - if ur using a small type batt it can cause resets on the unit if u use a high torque/speed motor - tried it with a systema magnum and u have no idea the hell it causes. Also i'd switch to deans connectors to allow a more freely flowing current or u may have issues in colder weather with the unit reading the battery as too weak to funtion even if it's fine.

if ur up for a bit of work though i recon its worth it
CJay is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Information Center > Newbie Tank

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
AirsoftParts.ca

All times are GMT -4. The time now is 11:23.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2017, vBulletin Solutions, Inc.