Airsoft Canada
AirsoftParts.ca

Go Back   Airsoft Canada > Information Center > Newbie Tank
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

ics m4 setup

:

Newbie Tank

Reply
 
Thread Tools Search this Thread
Old February 15th, 2009, 09:30   #1
Wolf13
 
Join Date: Jan 2009
Location: Montreal
ics m4 setup

here is my set up for my ics m4 right now....

Systema TB barrel
upgraded upper gearbox
9.6v 3300 mah battery(i need to upgrade but dont no to what)
fore grip bi-pod
5000 round drum mag
A cog scope
Classic army silencer
Folding stock
and a cheap little gun light
What can i add to this gun to make it better?
Wolf13 is offline   Reply With Quote
Old February 15th, 2009, 11:09   #2
TCLP
 
TCLP's Avatar
 
Join Date: Jul 2005
Location: Red Deer
Quote:
Originally Posted by Wolf13 View Post
here is my set up for my ics m4 right now....

Systema TB barrel
upgraded upper gearbox
9.6v 3300 mah battery(i need to upgrade but dont no to what)
fore grip bi-pod
5000 round drum mag
A cog scope
Classic army silencer
Folding stock
and a cheap little gun light
What can i add to this gun to make it better?
Where are you from that way we can give yopu local FPS and if A 9.6V 3300mah battery isn't enough then you either have to strong a spring or you need more trigger control. Also list the upgrades to your upper.
And get high caps at least if your going to shoot that much as you don't see m4's with drum mags in the real world.
__________________
Quote:
Originally Posted by Crunchmeister View Post
Imagine ads for semen restaurants. I can see it now... "Come to Seminal Sam's, where you can eat loads without blowing all your wad..."
TCLP is offline   Reply With Quote
Old February 15th, 2009, 12:18   #3
Donster
 
Donster's Avatar
 
Join Date: Jul 2007
Location: Ontario
if the gearbox comes with nylon bushings, replace them with metal ones. Your current battery sounds find IMHO. replace the crappy systema barrel with either a Prometheus, Madbull or KM. They are solid performers and not that pricy. I personally think that systema barrels suck. what is your mechbox upgraded with? it might need more than you think.
P.S: Fill out your profile
__________________
(SFW:Check out this band!)www.myspace.com/maryroseobsession
Donster is offline   Reply With Quote
Old February 15th, 2009, 12:35   #4
Wolf13
 
Join Date: Jan 2009
Location: Montreal
Quote:
Originally Posted by DONSTER 125 View Post
if the gearbox comes with nylon bushings, replace them with metal ones. Your current battery sounds find IMHO. replace the crappy systema barrel with either a Prometheus, Madbull or KM. They are solid performers and not that pricy. I personally think that systema barrels suck. what is your mechbox upgraded with? it might need more than you think.
P.S: Fill out your profile
here is my mech box upgrade: http://www.airsplat.com/Items/AC-UPI-MA120K.htm
Wolf13 is offline   Reply With Quote
Old February 15th, 2009, 12:48   #5
Donster
 
Donster's Avatar
 
Join Date: Jul 2007
Location: Ontario
well there is not much else you could do to your gun. Your battery is ideal for what you are running and so long as the nylong bushings (if ICS used them) are replaced with metal ones, the only thing that i would do, would be to get a slightly longer inner barrel (from one of the companies that i mentioned before) and use the silencer to cover it up. This way, you will get ideal accuracy and range and so long as you plan to keep the silencer on permanently, looks wont be sacrificed either.
__________________
(SFW:Check out this band!)www.myspace.com/maryroseobsession
Donster is offline   Reply With Quote
Old February 15th, 2009, 13:39   #6
peacekeeper
formerly bazza
 
Join Date: May 2004
Location: Calgary alberta
ditch the drum mag , cause it aint no lmg , but then again thats my opinion
peacekeeper is offline   Reply With Quote
Old February 15th, 2009, 14:55   #7
Death March
 
Death March's Avatar
 
Join Date: Feb 2006
Location: Manitoba
What do you want from your set-up? indoor or outdoor? I think the newer ICS have metal bushings in them now for sometime.
My ICS M4,has the MA-56 upper package,Sysytma gears,top power bushings,Prometheus 6.03 (407mm) G&P crane stock with a G&P 2200 NiMah battery.This set-up runs 398 fps for me.I don't useit as much as I use to,but it's 4 years old now and still going! I have other upper cyl. set-ups (4-5) for indoor use. I don't think that drum mag will work with ICS,but if you can try one out before you buy would be awsome. The biggest problem I have with mine is finding Mags that work in it.I have a mag-clamp with two ICS Hi-caps lol. They were the only ones that worked in mine. Hope that helps some,Cheers!
__________________
Death Before Dishonor" Bleeding Black Label"
Death March is offline   Reply With Quote
Old February 15th, 2009, 19:25   #8
HaZarD SFD
 
HaZarD SFD's Avatar
 
Join Date: Sep 2005
Location: Ottawa
Drum march.. use Mag brand mags.. they work fine.. I have 9 midcaps.
__________________
No Comment.
HaZarD SFD is offline   Reply With Quote
Old February 15th, 2009, 19:29   #9
AngelusNex
formerly Sepulcrum
 
AngelusNex's Avatar
 
Join Date: May 2007
Location: Kingston,ON, aka Funkasia
Send a message via MSN to AngelusNex
Quote:
Originally Posted by TCLP View Post
Where are you from that way we can give yopu local FPS and if A 9.6V 3300mah battery isn't enough then you either have to strong a spring or you need more trigger control. Also list the upgrades to your upper.
And get high caps at least if your going to shoot that much as you don't see m4's with drum mags in the real world.
Yes you do! Just ever so very rarely. Also most games have rules about drum mags in standard rifles.
AngelusNex is offline   Reply With Quote
Old February 15th, 2009, 22:01   #10
chompizikstan
 
chompizikstan's Avatar
 
Join Date: Sep 2008
Location: Connecticut, US
If you haven't already get a firefly or systema bucking a tightbore is useless w/the stock ICS bucking.
chompizikstan is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Information Center > Newbie Tank

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
AirsoftParts.ca

All times are GMT -4. The time now is 15:35.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2017, vBulletin Solutions, Inc.