Airsoft Canada

Go Back   Airsoft Canada > Information Center > Reviews
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

AI Tornado Distraction Device Kit



Thread Tools Search this Thread
Old December 22nd, 2008, 15:36   #1
Colin_S's Avatar
Join Date: Jul 2004
Location: Toronto, Ontario
Send a message via MSN to Colin_S Send a message via Skype™ to Colin_S
AI Tornado Distraction Device Kit

The AI Tornado is easily the most effect grenade on the market and itíll clear a fair sized room of bad guys quite easily, but there are some cases where a frag grenade is not appropriate. If there are hostages or sensitive equipment which need to be retrieved, the attacking squad has no choice but to pile into the room as fast as possible to overwhelm the enemy. What is needed is a flashbang type device which unfortunately does not exist, at least for airsoft. Iíve been using the Thumper TG6 but at ~$5 a pop, it can get pretty expensive to run continuously.

Airsoft Innovations has come to the rescue with its Distraction Device kit. For around the price of a bag of BBs, you can pick up the DD kit which converts the Tornado from a frag grenade to a distraction device. Click the thumbnails for higher res pics.

Included in the package is the burst ring, 48 burst discs and the instruction manual. Converting the Tornado to and from grenade to distraction device takes about 30 seconds. If you run into difficulty the instructions sheet will guide you; itís well written and easy to follow. In any case weíll go through converting the tornado to a distraction device here.

First, take off the valve cover from the bottom and then pop off the safety plug with your thumb Ė hold the cap in your hands with the side with words facing you, then press on the rubber plug.

Once thatís done, clean the inside of your valve cover of any dirt, then take a burst disk and tape it into the center of the cap. Now we need to install the burst ring, which will take a few secondsÖ

Put the burst ring into the circular opening with the O ring sitting in the upward position (if the bottom of the grenade is facing you, you should be able to see the burst ring O ring). Once thatís done, insert the pin, gas up the Tornado, screw in the valve cover and youíre set. You now have a distraction device, which is as close as you can get to a flashbang. To use the Tornado simply pull the pin, throw it into the room and follow in as it goes off.

According to AI, the Tornado generates ~120dB of noise at 3′. While I have no tools to measure this, it is on par with the noise the Thumper makes when I set both off in my condo (wife absolutely loved me testing it over the weekend). With 50 burst discs going for $4.95US from AI, the Tornado distraction device costs pennies to run, making it much cheaper than the Thumper which comes in at ~$5 a shot.

Having used and been on the receiving end of the Tornado distraction device at TTAC3 I can say you never know what to expect when a Tornado is tossed into a room. If itís a frag, youíll be hit in a few seconds. If itís in flash bang mode while youíre focusing on the grenade, youíll be shot by the swarm of people entering the room.

Yeah it works pretty darn well.

Mod if this should be placed in the AV section, please move to appropriate spot.

Team GHOSTS - Fides et Amicitia
Colin_S is offline   Reply With Quote
Old December 22nd, 2008, 15:42   #2
Brian McIlmoyle
Brian McIlmoyle's Avatar
Join Date: Apr 2005
Location: Toronto
The best part

The bad guys never know if its a Frag or a DD as you can't tell by looking at the grenade..

in every case the guys in the room start scrambling for cover..

If your entries are well drilled and your team enters right along with the dd .. you will catch them as they scramble.

It really works.
Brian McIlmoyle
TTAC3 Director
CAPS Range Officer
Toronto Downtown Age Verifier


If the tongue could cut as the sword does, the dead would be infinite
Brian McIlmoyle is offline   Reply With Quote
Old April 23rd, 2009, 21:39   #3
-Erebus-'s Avatar
Join Date: Jun 2008
Location: Sharon, ON
Send a message via MSN to -Erebus-
Cant Wait to try it out.
-Erebus- is offline   Reply With Quote

Go Back   Airsoft Canada > Information Center > Reviews


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Airsoft Canada

All times are GMT -4. The time now is 02:58.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2016, vBulletin Solutions, Inc.