Airsoft Canada

Go Back   Airsoft Canada > Information Center > Reviews
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Review: KWA M9 PTP



Thread Tools Search this Thread
Old September 12th, 2008, 18:41   #16
Skladfin's Avatar
Join Date: Dec 2006
Location: Vancouver, B.C
he probably meant which brand of mags are compatible
Skladfin is offline   Reply With Quote
Old June 6th, 2009, 12:17   #17
venture's Avatar
Join Date: Jun 2005
Location: Halifax

Locking block comes reinforced on new M9 PTP's now. A new one from March 2009 had a defective External Cylinder Assembly. The bottom of the cylinder has a metal bar that pushes the bb up the ramp into the barrel. On this particular M9, the end of the bar fell off after the first 3 shots were fired. The bar was then too short to get the bb up the ramp without jamming.

This had to be a defect. The piece in question appears to be glued or soldered on to the rest of the bar. It is about 2-3mm long. The bar it is glued to had paint on the end so they did not get a good bond; the first few fully charged cycles rattled it free.

I never found the piece. I used epoxy to build up the bar that remained. Works 100% now.

Also have KWA M1911DS PTP. The cylinder seems the same and the little piece in question just appears to be glued on.
venture is offline   Reply With Quote

Go Back   Airsoft Canada > Information Center > Reviews


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Airsoft Canada

All times are GMT -4. The time now is 16:41.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2016, vBulletin Solutions, Inc.