Airsoft Canada
www.jsairsoft.com

Go Back   Airsoft Canada > General > General
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Ak-47 sights are a pain for me.

:

General

Reply
 
Thread Tools Search this Thread
Old September 12th, 2007, 19:29   #16
ancorp
AK Guru
 
ancorp's Avatar
 
Join Date: Mar 2005
Location: Vaughan, Ontario (near Toronto)
Quote:
Originally Posted by Greylocks View Post
The reason for aiming at the center of the target (and remember that Wikipedia is only as good as who wrote the article) is simple; it's far easyer to acquire a target, and not miss, if you aim for the center of it.

Target acquisition is far faster, your chances of hitting something are greater.

Basic target shooting techniques that apply for IPSC and other applications.

PS, recoil happens long after the bullet has left the barrel.
I was asking why I constantly see instructions/pictures that show that you must aim BELOW the center of the target...
__________________
ancorp is offline   Reply With Quote
Old September 12th, 2007, 20:35   #17
Greylocks
 
Greylocks's Avatar
 
Join Date: Dec 2001
Location: Gatineau, Quebec (Near Ottawa)
Because everyone has a different idea of what is best? Center of mass is quicker under stress, and even used in competitions.

Nobody in International Shooting Union (includes the Olympics) teaches to aim at the bottom of the target. IPSC and other combat shooting techniques say to aim for the center of mass/target. It makes no sense to aim for an edge or a small target, does it?
Greylocks is offline   Reply With Quote
Old September 12th, 2007, 20:59   #18
MADDOG
 
MADDOG's Avatar
 
Join Date: Feb 2003
Location: Aurora/Ontario
Quote:
Originally Posted by ancorp View Post
One thing I don't get - why does the military train soldiers to sight in their sights so when you aim under the bullseye, you hit its center? That would only be effective for a certain size target. In the field, a human figure ain't similar to that in any way, and personally I think it makes sense to adjust your sights so the tip of the front sight post is in the middle of the target, exactly where you want it to hit, instead of having to consider that it would hit higher...

Perhaps there's something I don't know about this system...
Many sights only go down to 200m in elevation so you have to adjust for the shortcomings of individual rifles if engaging from the 100m mark

Chances are a soldier will forget to adjust the elevation in the heat of battle. Better to have the point of impact lower to increase the hit rate if a soldier makes a mistake.

MD
__________________
WOLFPACK U-96

Cry Havoc, Let slip the Dogs of War!

"Opportunities multiply as they are seized."
- Sun Tzu, The Art of War
MADDOG is offline   Reply With Quote
Old September 12th, 2007, 21:09   #19
Greylocks
 
Greylocks's Avatar
 
Join Date: Dec 2001
Location: Gatineau, Quebec (Near Ottawa)
Agreed, the range does matter. But for airsoft it's not much of an issue.

Even at long ranges, center of mass makes sense because you still have a lot of leeway in all directions if you aim for the center. The way it's described; if you shoot low you hit the ground. If you aim at center you will at least hit the lower target area or the upper area, or side to side.

It's far simpler to show than to describe.
Greylocks is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > General > General

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
www.jsairsoft.com

All times are GMT -4. The time now is 09:31.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2017, vBulletin Solutions, Inc.