Airsoft Canada
MILSIG

Go Back   Airsoft Canada > General > General
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

G&P EBR

:

General

Reply
 
Thread Tools Search this Thread
Old September 5th, 2006, 13:17   #1
R.A.T.M._JLD
 
R.A.T.M._JLD's Avatar
 
Join Date: Feb 2005
Location: Prince George, BC
Send a message via MSN to R.A.T.M._JLD
G&P EBR

G&P has finally posted some pics and info (not much but some) on their site.



Quote:
Originally Posted by G&P
-For Marui M14 Series
-Maximum can fit 9.6v 3000mAh Battery
They say it's going to cost around $700. Can fit a 9.6v 3000mAh battery.

I kind of like the look of the KA one. Looks a bit lounger but takes only a 9.6v 1100mAh battery. I have also read that the G&P one can change stocks like the real EBR.
__________________
R.A.T.M._JLD is offline   Reply With Quote
Old September 5th, 2006, 13:39   #2
Hades
 
Hades's Avatar
 
Join Date: Jan 2005
Location: Home
Send a message via MSN to Hades
Finally a cheaper version. Now it's up to the big decision of changing my M-14 or buying a new one and changing that into the EBR
Hades is offline   Reply With Quote
Old September 5th, 2006, 14:00   #3
R.A.T.M._JLD
 
R.A.T.M._JLD's Avatar
 
Join Date: Feb 2005
Location: Prince George, BC
Send a message via MSN to R.A.T.M._JLD
Well on WGC they have the new KA one for around $600. However the G&P one can take a bigger battery and you can change the stock with M870 stocks (not 100% on that just read it on Arnie's) but yet again the KA one is longer and I kind of like that a bit better.
__________________
R.A.T.M._JLD is offline   Reply With Quote
Old September 5th, 2006, 14:11   #4
Hades
 
Hades's Avatar
 
Join Date: Jan 2005
Location: Home
Send a message via MSN to Hades
Bigger battery is always nice though when I play i think the most mags I ever went through in a day on my M-14 is 4 locaps. So even an 1100mah battery would be ok. I also kinda like the KA one better. I have a feeling instead of getting a whole new AEG I might pick one of these up. I also like the look of that stock so unless it is extremely uncomfortable I probably would not change it.
Hades is offline   Reply With Quote
Old September 5th, 2006, 16:15   #5
ILLusion
GBB Whisperer
 
ILLusion's Avatar
 
Join Date: Jun 2002
Location: Toronto
It actually looks the exact same dimensions as the King Arms version as far as I can tell from these 'net photos.

It might look different because the original KA version did not come with the polymer handguard. The new USD$603 version comes with the handguard and as far as I can tell, they look almost the same.

I'd like to know where the battery goes, though...


New King Arms version:
ILLusion is offline   Reply With Quote
Old September 5th, 2006, 16:17   #6
Tankdude
 
Join Date: Jan 2005
Location: Ontario
Send a message via MSN to Tankdude
you can see the battery in the picture. look at the vent holes and look for green
Tankdude is offline   Reply With Quote
Old September 5th, 2006, 16:18   #7
Blastyman
 
Blastyman's Avatar
 
Join Date: Feb 2003
Location: Edmonton ,AB
Send a message via ICQ to Blastyman
Quote:
Originally Posted by ILLusion
It actually looks the exact same dimensions as the King Arms version. I'm not sure what you guys are talking about.

It might look different because the original KA version did not come with the polymer handguard. The new USD$603 version comes with the handguard and as far as I can tell, they look almost the same.

I'd like to know where the battery goes, though...
Actually looking at the 2 pics Brian it appears the G&P is shorter. You notice the KA one goes closer to the gasblock then the G&P.

Unless there is some weird barrel length situation going one.

Which is strange that the RAS might even be smaller and hold a larger battery.
Blastyman is offline   Reply With Quote
Old September 5th, 2006, 16:50   #8
Hades
 
Hades's Avatar
 
Join Date: Jan 2005
Location: Home
Send a message via MSN to Hades
Looks like possibly the G&P one with the polymer handguard might have that little bit of extra space where the handguard is to be able to accept a larger battery, unless the handguard is removeable then it might be a bit larger then the KA one. Regardless I'm still trying to decide now which I like more, with the handguard or without.
Hades is offline   Reply With Quote
Old September 5th, 2006, 17:02   #9
R.A.T.M._JLD
 
R.A.T.M._JLD's Avatar
 
Join Date: Feb 2005
Location: Prince George, BC
Send a message via MSN to R.A.T.M._JLD
The new KA one has one that you can take off and on.
__________________
R.A.T.M._JLD is offline   Reply With Quote
Old September 5th, 2006, 17:53   #10
Combine
 
Combine's Avatar
 
Join Date: Sep 2005
Location: Alymer, Quebec
That is one beautiful kit right there. Too bad its so expensive for just the kit...
Combine is offline   Reply With Quote
Old September 5th, 2006, 19:06   #11
Drake
E-01
 
Drake's Avatar
 
Join Date: Dec 2001
Location: Montreal, QC
Well the G&P one looks pretty accurate, I'm only disappointed they opted to put a long barrel on it instead of the normal short one. Hopefully there'sll be a propper short barrel variant.

Either way, nice piece to go with my Marine/FR kit
__________________
Drake is offline   Reply With Quote
Old September 5th, 2006, 19:09   #12
Hades
 
Hades's Avatar
 
Join Date: Jan 2005
Location: Home
Send a message via MSN to Hades
I'm pretty sure all the kit is, is the body kit. The barrel assembly you pull out of the TM M-14 and drop into it along with the internals.
Hades is offline   Reply With Quote
Old September 5th, 2006, 19:40   #13
ILLusion
GBB Whisperer
 
ILLusion's Avatar
 
Join Date: Jun 2002
Location: Toronto
Quote:
Originally Posted by Blastyman
Quote:
Originally Posted by ILLusion
It actually looks the exact same dimensions as the King Arms version. I'm not sure what you guys are talking about.

It might look different because the original KA version did not come with the polymer handguard. The new USD$603 version comes with the handguard and as far as I can tell, they look almost the same.

I'd like to know where the battery goes, though...
Actually looking at the 2 pics Brian it appears the G&P is shorter. You notice the KA one goes closer to the gasblock then the G&P.

Unless there is some weird barrel length situation going one.

Which is strange that the RAS might even be smaller and hold a larger battery.
Good eye. I always never did well with Where's Waldo.

All of the KA ones seem to go closer to the gas block.

Another thing I just noticed, the elongated vents at the top towards the shooter, some pictures show FIVE holes there (such as the KA one shown at the top of this thread), but some other pictures show only FOUR holes (such as the ones I posted.)


Quote:
Originally Posted by Drake
Well the G&P one looks pretty accurate, I'm only disappointed they opted to put a long barrel on it instead of the normal short one. Hopefully there'sll be a propper short barrel variant.

Either way, nice piece to go with my Marine/FR kit
There are already plenty of aftermarket short barrels available. Off the top of my head, there are variants made by PDI and First Factory. I'm personally using the First Factory one at the moment, but I have the PDI ones in inventory as well and they look very nice.

But other than that, looking at the real EBR and comparing it to these airsoft pictures, the G&P one does look more accurate, being shorter than the King Arms one.



Anyways, seeing all these EBR kits just makes me that much closer to building my baby...

ILLusion is offline   Reply With Quote
Old September 5th, 2006, 20:06   #14
R.A.T.M._JLD
 
R.A.T.M._JLD's Avatar
 
Join Date: Feb 2005
Location: Prince George, BC
Send a message via MSN to R.A.T.M._JLD


Quote:
Originally Posted by tacticalshotgun.ca
Our flat black anodized EBR chassis...we felt this rig was slightly muzzle heavy.


Quote:
Originally Posted by tacticalshotgun.ca
Our light grey anodized ChopMod. We felt this rig handled beautifully.
They make bouth the shorter one is the ChopMod.
__________________
R.A.T.M._JLD is offline   Reply With Quote
Old September 5th, 2006, 20:23   #15
ILLusion
GBB Whisperer
 
ILLusion's Avatar
 
Join Date: Jun 2002
Location: Toronto
ah... that's right. I forgot about that in my research a while back.
ILLusion is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > General > General

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
MILSIG

All times are GMT -4. The time now is 07:51.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2017, vBulletin Solutions, Inc.