Airsoft Canada
Airsoft Depot

Go Back   Airsoft Canada > General > General
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

What's The Difference between weaver and picatinny rails?

:

General

Reply
 
Thread Tools Search this Thread
Old December 26th, 2005, 20:53   #1
[]D[][]\/[][]D
 
[]D[][]\/[][]D's Avatar
 
Join Date: Dec 2005
Location: Scarborough, ON
What's The Difference between weaver and picatinny rails?

What's the difference between Weaver style rails and Picatinny style rails and which is more common?
[]D[][]\/[][]D is offline   Reply With Quote
Old December 26th, 2005, 21:03   #2
Digital_Assasin
 
Digital_Assasin's Avatar
 
Join Date: Jan 2004
Location: OTTAWA.ON.CA
Short Answer:

They are not the same, although they share similar characteristics. The Picatinny, aka R.I.S., is more common. It's what you find on most arisoft guns.

Long Answer

Quote:
Originally Posted by Wikipedia
A Weaver rail mount (Picatinny type) is a system to connect peripheral accessories to rifles, shotguns, pistols, archery bows, etc.

The slot spacing in the Weaver rail is 3.8mm, while the slot spacing on the Picatinny rail is 5mm. Therefore, although they look similar, they are in fact quite different and not entirely interchangeable. While it is possible to attach a Weaver mount device to a Picatinny rail, the "slop" in the slot is large enough that a robust attachment is impossible for devices which click into the slots. Devices which are held to the rail by side screws or grips are usually interchangable.


Quote:
Originally Posted by Wikipedia
The Picatinny rail is a bracket used on some firearms in order to provide a standardized mounting platform for scopes and other accessories such as tactical lights and laser sighting modules. The standard was first published by the Picatinny Arsenal and carries the official title MIL-STD-1913.

The rail is typically placed directly on the weapon's receiver, in the position normally occupied by the rear sights. Shaped in cross-section roughly like a wide T, scopes are mounted on the rail by sliding them on from one end or the other. In order to provide a stable platform, the rail should not flex as the barrel heats and cools. For this reason most Picatinny rails are cut crosswise, to give them considerable room to expand and contract lengthwise.

Originally used only for scopes, the rails were typically found only on larger caliber rifles. With the increased use of night vision scopes, they started to appear on smaller assault rifles as well, to the point today where they are replacing the original "iron sights" with versions that can be mounted on the rails.

Once the rails became fairly common, they started to be used for other accessories, flashlights for instance. This led to a sort of chain reaction, where practically every accessory is now designed to be mounted on a rail, including bipods, bayonets and laser sights. In turn, this had led to the introduction of "small rails" that can be fastened to the guns in various locations, and in some cases, entire grips with rails built-in on all sides. Short rails now appear even on shotguns and pistols.




http://en.wikipedia.org/wiki/Picatinny_rail
http://en.wikipedia.org/wiki/Weaver_rail
Digital_Assasin is offline   Reply With Quote
Old December 26th, 2005, 21:22   #3
yanhchan
 
yanhchan's Avatar
 
Join Date: Jun 2005
Location: Scarborough/Richmond Hill ON
Send a message via AIM to yanhchan Send a message via MSN to yanhchan
dude did you even search to forum?
__________________
YANHCHAN'S AIRSMITHING: AEG repair/Tune up/Upgrades V2/V3 mechboxes, rewiring/reconnecting.

Ask not what your country can do for you; ask what you can do for your country ~John F. Kennedy
yanhchan is offline   Reply With Quote
Old December 26th, 2005, 21:34   #4
Digital_Assasin
 
Digital_Assasin's Avatar
 
Join Date: Jan 2004
Location: OTTAWA.ON.CA
Quote:
Originally Posted by yanhchan
dude did you even search to forum?
Did you bother to search before posting your dumbass comment?

If you did, then you would know a search for "Picatinny OR Weaver" returns 140 results, and that there was only one that even came a distant close to explaining the original question.
Digital_Assasin is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > General > General

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
Airsoft Depot

All times are GMT -4. The time now is 07:22.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2017, vBulletin Solutions, Inc.