|September 18th, 2005, 03:32||#1|
Review - TM P226 Sig Sauer ( Review from me )
Here's the link that convinced me to get one ! Dammit ! More money to spend on airsoft again ! Thanks to Optix to get me one !
Can't wait to see it in my hands !
For sure, as soon as I get mine, I'll let you know if it's good or not !
|September 18th, 2005, 08:57||#2|
Join Date: Aug 2003
First time I tried the TM P226 was with my buddy Rat's Sig. It felt light but after shooting and seeing the consistancy of the groupings, I had to get one. If you can get in touch with Gump or Wil, they were selling the Sig P226 for a great price. Not sure if they still have any of the 30 pistols they got in.
Something that hasn't been mention in that review about the TM P226 is that the safety de-cocking lever does work in the P226 unlike the one in their Mk23 NBB SOCOM. The P226 will also fit the Bianchi M12 holster for the Beretta M92F if you're still waiting to find a 6004 holster for your new Sig. ;-)
bruce: Team Bad Karma-(BK-05)
: Special Battalion East-(SBE-01)
|September 19th, 2005, 04:41||#3|
Join Date: Mar 2004
Location: North Vancouver, B.C.
what's your judgement regarding the quality of the slide?
(relevance: I can think of alot of people who will be using propane in this pistol... )
I'm up in the air right now about the sidearm I'll eventually be buying again.
I'm thinking of going with the tried 'n' true Hi-capa, but I'm thinking I might prefer the feel and look of the 226. But if the slide is iffy...
|September 19th, 2005, 04:52||#4|
Join Date: Feb 2005
Location: Montreal, PQ
man i love this gun...
as for the quality of the slide since it is not metal, it will eventually give and crack...eventually...till then i am still running propane through mine with no hitches.
also, ACTION came out with the metal body and slide for a much more reasonable price than the previous brand, Prime, that hosted the combo. there is roughly a 250USD price difference between this set and the one that came out initially although i do not know which one is better or if one model has problems over another.
Prime model for 375 USD
Action model for 120USD
|September 21st, 2005, 13:56||#5|
Wow ! I just received, my P226, and I just can say ! Amazing ! TM plastic are strong you know... got a friend who has aa TM M92F and still running great with the stock... running it with propane... or green gas... no problem at all.
Look so good !
Also, I'm gonna do some test firing this afternoon... I'll tell you more after !
|September 21st, 2005, 14:35||#6|
Join Date: Feb 2005
Location: Montreal, PQ
no doubt you will have great results. :tup:
on another note, i would like to know if anyone here has purchased the metal body and slide from either Prime and/or Action.
I am most interested in a review of the Action kits because of its price.
btw, if anyone can get their hands on one of these let me know...im very interested.
|September 21st, 2005, 14:49||#7|
Ok, let's go to my first review on ASC.
This is gonna be for the TM P226.
I'm gonna be simple in my review for two reasons.
Many of us don't really know about GBB fonctionalities and also, specification.
Second reason is that we use GBB for sidearm : This means secondary fire...
So, first impression ? Real nice. Plastic don't seem to be plastic. Usual by Tokyo Marui Brand. Trademark for one side is Tokyo marui ( Ejection shell port ) the other one, P226 Stainless trademarks. Good to see that they are both, less confusion with a true and an airsoft. Weight ? Without mag, just like a... bottle of water 500 ml. With mag loaded, Mmmm... more heavier that the beretta I think. Great feeling in hands...
Slide impression ? Great shape and seems solid. I saw that the slide rails are mostly plastic... but seems very solid and I don't think I'll break the slide after a few month playing with... Anyway, TM Plastic have always been solide and tough ! My friend Brakoo had a TM Beretta, using Green gas... for a long time, and didn't break at all. He changed his slide not because it was broken, because he wanted to spend more money on airsoft !
When you pull the slide back, slide catch is slightly near the release hammer button... yes there is one ! You won't break your hammer by pressing your trigger and trying to get it at the fly... involving harming someone by trying to safety off your hammer down. But, by the time, you know that slide catch is fairly backward of the hammer release button, so, like everything... get used to.
When you release the slide, I can say that... the gun seems to get some power. Strong movement when you push back the slide to its ready position.
Mags ? Yeah, not CLIP ! Please. There are a bit bigger than TM M92 Berettas. So, involving less freezing mag when you pull the trigger at cold temperature outside. When you got a bigger mag, ( Para ord. 14.45 ) You can use it below 10 degree celcius without a problem. You can check the review at the first post. They tested it at different temperature... and seem they got no problem at all... except the refrigerator one ! :P For leaking, seems solid... same concept that the Beretta one, so... didn't have a problem with those before. I guess you won't have any with these !
Also, good point on those, bbs are hard to load fast, but this mean, when you put a mag in your pocket or mag pouches for handgun, you won't take an empty mag because you got an accidental unloaded mag... glock mags and para mags are $/&?$/ for this... when it touch the bottom of your pouch... it empties bbs... this one won't make that... bbs can't touch the bottom. Design seems to prevent this now !
Shooting ! Yeah, I try it with Green gas. Propane is the same, but I've got a almost empty green gas bottle in my wardrobe so... guess what... Finished it to clear this out !
With one mag, fill, Shot 1¾ mags, real good. So, you're good to go for game without missing gas during you're firing session ! Mostly of you know that TM has HOP UP version on this one, like others... lol Your hop up on this one don't need to be adjust with allen key... so have a little wheel that you have to spin, left or right, just like AEG on the ejection port... except this one, you have to remove the slide, adjust and replace the slide. I can tell, very accurate. Also, you have a strong blow back when you fired. Not like the Deagle, but pretty much more than the beretta, less than the WA Para ordnance. just a bit less. I can tell you, WA Para ord has a pretty strong blow back. So... P226 goes in second place. Good sound also. Bang !
So, if you want a GBB, don't want to upgrade it at full force, need something strong, and accurate without putting $$$$$$$$$$$$$$$$$$$. You know, airsoft is $$$$$$$$$$$$$$$$$$$$$ So... My score to this one is 9/10.
Tru has some for 300$ or can have some ! Cause I took his last ! Hahaha !
Good points ?
Strong plastic TM made !
Strong blow back
Good capacity of gas
Release hammer button ( Prevent Accident )
That's a P226 !
Pricing is good !
There giving a cleaning rod !!! YEAH !!!
Bad points ?
Ok ok ok, it's plastic...
It's not recommended to pull the hammer back with one finger !
You must shoot all bbs to empty your mag... hard to clean... :S
Mmmm... that's all for now !
Hope it's gonna be ok for my review and if you haven't a clear idea of those... hope it's gonna be more clear in your mind.
|September 21st, 2005, 17:17||#8|
Join Date: Nov 2004
Location: Montreal, QC
TM P90, TM G36C, TM P226
|November 3rd, 2005, 11:14||#9|
Join Date: Apr 2002
Location: Winnipeg, MB
I just have a quick question about your review...
Under the bad points you said that it is not recomended to pull back the hammer with one finger, why is that?
Is it bad for the gun or something?!?
I have been doing that to my TM P226 since I got itabout 3 weeks ago and no problems, but if there is an issue or a known problem I will stop right away.
"Banning firearms to prevent criminal use of guns is about as smart as banning
marriage to prevent spousal abuse, or banning pregnancy to prevent child abuse. "
"When just seconds can mean life or death, the police are just minutes away"
"If you can read this, thank a teacher... Since it's in English, thank a soldier"
|Thread Tools||Search this Thread|