Airsoft Canada
MILSIG

Go Back   Airsoft Canada > Information Center > Newbie Tank
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

C-TAC CTAWP Pro Sniper Rifle

:

Newbie Tank

Reply
 
Thread Tools Search this Thread
Old May 30th, 2013, 13:44   #1
Tornee
 
Join Date: May 2013
C-TAC CTAWP Pro Sniper Rifle

I m new to airsoft...a recenty bought a C-TAC from buyairsoft. The spring is so hard to crank ! After 50 bbs and many malfonction ( bb doesnt load properly and set loose in the gun preventing another shot, must open gun to set free bb) i found this part ( plastic) who's job is to get bb from the mag and load it. I ask for replacement parts..can i get them metal ? the scope seems pretty but generic...dont know how long will last. Feel free to comment and advise me...pros and cons are welcome ! I dont know yet how to post jpeg...i have pics of this plastic cheap part who's causing me so much trouble.
Tornee is offline   Reply With Quote
Old May 30th, 2013, 13:56   #2
Hectic
Oh we do hate you, just never felt like wasting the time to give you a user title :P
 
Hectic's Avatar
 
Join Date: Apr 2007
Location: Toronto, Ontario
Sniper rifles dont often work well out of the box and most of us who run bolt actions put about 1000 dollers into them to have them perform well and be durable enough to last more then a few mags.
The first issue with your gun is its a ctac. The next problem was buin from buyairsoft. Im not familiar with that modle but i can say almost certianly that you wount find many or any upgrade or replacement parts for it.
You may get lucky and find it takes vsr10 or l96 upgrade parts but a quick google search doesnt look promising.
Look for a refund from buyairsoft if its new and malfunctioning. Then take the money you spent on that and buy a decent l96 (i say l96 cause it looks like the gun you currently have. I would suggest a vsr10 personnaly)
Then start savin up for the 800 bucks in uopgrades youll need. Id suggest buyin a laylax piston and steel sears right away cause those will wear out first and only cost 150-200 bucks so its better to just do em right away.
__________________
Quote:
Originally Posted by m102404 View Post
Hectic....FFS start writing in coherent sentences!!!
Quote:
Originally Posted by JDoorn View Post
Thanks Hectic,
While your posts are sometimes a difficult read, you sure are helpfull
Lvl. 3 certified sniper
FinchFieldAirsoft

Last edited by Hectic; May 30th, 2013 at 14:03..
Hectic is offline   Reply With Quote
Old May 30th, 2013, 13:58   #3
L473ncy
 
L473ncy's Avatar
 
Join Date: Oct 2004
Location: 11-30-24-1W5
Upload your image to an image host like imgur, tinypic, etc. and use the [ IMG][ /IMG] tags to hotlink them.

As for the part you're describing.... I'm assuming you mean the little plastic piece in the magazine that stops the BB's from being pushed out all at once? If so, you're SOL and need to buy a new mag (or at least I haven't found a replacement part for that). Also pretty sure they're all plastic.
__________________
ಠ_ಠLess QQ more Pew Pew
READY TO >> RACE
L473ncy is offline   Reply With Quote
Old May 30th, 2013, 13:59   #4
Tornee
 
Join Date: May 2013
Thank you Hectic...rude reality but honest...that's what i like !
Tornee is offline   Reply With Quote
Old May 30th, 2013, 14:15   #5
Hectic
Oh we do hate you, just never felt like wasting the time to give you a user title :P
 
Hectic's Avatar
 
Join Date: Apr 2007
Location: Toronto, Ontario
Not fully familiar with those l96 style guns like i said but i think the part is the lil ramp that guieds the bb from the mag to the hop chamber when then nozzle pushes it forward. In the vsr's it goes in the hop chamber and is zort of upside down from how it is on most guns. On m4's with plastic bodies amd 2 peice hop ups its part of the feed tube portion of the hop up that has the lil flat bit that goes towards the nozzle to prevent bbs from out below the nozzle when it cycles back towards the gearbox. Sounds like that part is xeformed or broken causing bbs to become jammed between the hop up/ramp and the body of the gun then when tryin to chamber a new round the cylender cant go fully forward and just removing the mag and cycling the bolt wont cause the stray bb to fall free cause its really jammed in there. Happens on we m4 gbbr but you just do a standard jam clear like a real ar and yer good as there is ample space so droppin the mag and cycling the bolt drops the bb right out. Even facing the ejection port towards the ground and cycling the bolt works most times.

Sory OP i think your best bet is to just return and buy a know bolt action to build off of. Most of the l96 vsr10 and aps2 guns will work okay out of the box have a huge ammount of aftermarket parts and a vast pool of knowlage around the bords to help you.
__________________
Quote:
Originally Posted by m102404 View Post
Hectic....FFS start writing in coherent sentences!!!
Quote:
Originally Posted by JDoorn View Post
Thanks Hectic,
While your posts are sometimes a difficult read, you sure are helpfull
Lvl. 3 certified sniper
FinchFieldAirsoft
Hectic is offline   Reply With Quote
Old May 30th, 2013, 14:25   #6
Tornee
 
Join Date: May 2013
[IMG][/IMG]
Tornee is offline   Reply With Quote
Old May 30th, 2013, 14:25   #7
Tornee
 
Join Date: May 2013
[IMG][/IMG]
Tornee is offline   Reply With Quote
Old May 30th, 2013, 14:27   #8
Tornee
 
Join Date: May 2013
[IMG][/IMG]
Tornee is offline   Reply With Quote
Old May 30th, 2013, 14:28   #9
Tornee
 
Join Date: May 2013
The troublemaker ??

[IMG][/IMG]
Tornee is offline   Reply With Quote
Old May 30th, 2013, 17:11   #10
BuyAirsoft.ca
 
BuyAirsoft.ca's Avatar
 
Join Date: Oct 2010
Location: Central Alberta
Hi Tornee,

We are sorry to hear that you are having issues with your new CTAWP.

Just want to make sure that you have emailed in to our Tech Department so that they can set you up with repair info.

Thanks.
__________________
BuyAirsoft.ca is offline   Reply With Quote
Old May 30th, 2013, 18:46   #11
L473ncy
 
L473ncy's Avatar
 
Join Date: Oct 2004
Location: 11-30-24-1W5
For the record, you can actually post more than 1 picture per reply. Also, you don't need to do a double "[ img]" tag.

As for that part, I have no idea I don't particularly know sniper rifles that well. Buyairsoft has extended their help to you so just take it and see what they can offer in terms of help/warranty.
__________________
ಠ_ಠLess QQ more Pew Pew
READY TO >> RACE
L473ncy is offline   Reply With Quote
Old May 30th, 2013, 19:02   #12
Hectic
Oh we do hate you, just never felt like wasting the time to give you a user title :P
 
Hectic's Avatar
 
Join Date: Apr 2007
Location: Toronto, Ontario
Yeah its nice to see them extending a hand to help their customer.
Took me a few times to figure out thag photo bucket includes the [img]'s in the links.
Its handy just gotta click on it and paste it easy peasy.
As far as if thats the culprit im not sure. It does appear to be a metal part tho not plastic.
__________________
Quote:
Originally Posted by m102404 View Post
Hectic....FFS start writing in coherent sentences!!!
Quote:
Originally Posted by JDoorn View Post
Thanks Hectic,
While your posts are sometimes a difficult read, you sure are helpfull
Lvl. 3 certified sniper
FinchFieldAirsoft
Hectic is offline   Reply With Quote
Old May 30th, 2013, 23:49   #13
Tornee
 
Join Date: May 2013
Good news !

Shipping the rifle back to BuyAirsoft.ca. They offer this : ''We will cover the cost of parts, labour and return shipping to you. You will just be responsible for getting the rifle back to us''.
I will post another thread when all of this will be over, it can takes more than 4-5 weeks. Thank you for all your replies and stay tune for more...i'm sure everyone want to know how good is BuyAirsoft customer service.
Tornee is offline   Reply With Quote
Old June 16th, 2013, 01:09   #14
Immelmann
 
Immelmann's Avatar
 
Join Date: May 2011
Location: Caledon/Waterloo
Haha, we already know what we think of BuyAirsoft, and it's not good. Still, good to hear they're helping you out.
__________________
Callsign: Moose

Quote:
Originally Posted by uhc View Post
i actually dont like COD. im more worried that airsoft will make me violent or messed in the head.
Immelmann is offline   Reply With Quote
Old June 16th, 2013, 01:36   #15
MonnoncMaxou
 
MonnoncMaxou's Avatar
 
Join Date: May 2012
Location: Montréal
Looks like a Well MB4401 branded as C-TAC. Upgrades for this gun should be Tokyo Marui L96.
__________________
Black Coqs - Fireteam Echo
FAQ Boot Camp Certified
MonnoncMaxou is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Information Center > Newbie Tank

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
MILSIG

All times are GMT -4. The time now is 19:16.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2017, vBulletin Solutions, Inc.