Airsoft Canada

Go Back   Airsoft Canada > Information Center > Newbie Tank
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

A&K Masada compatibility


Newbie Tank

Thread Tools Search this Thread
Old February 15th, 2013, 04:09   #1
JerryMcGoulBerry's Avatar
Join Date: May 2012
Location: Calgary Alberta
A&K Masada compatibility

So I know about the Gearbox in the gun. Everything is okay except the air nozzle. I was wondering more about the hopup. I know the chamber itself is not standard, but I was thinking more about the nob, bucking, and barrel. I'm thinking of using a Madbull setup. I also heard the pinion gear is a little higher then usual. Could I use a different motor (Lonex A1 specifically) but use the A&K pinion gear? I also want to use a mosfet. Not a huge, programmable one, Just one that'll improve trigger response and save trigger contacts. I'm also kind of tempted to but in a lonex drop in Gearbox, and I'm assuming it will fit. I'll use the A&K air nozzle in the Gearbox.

Since I'm starting a thread, I may as well ask:
Are any of the products I'm mentioning red flags? If one of the things have a terrible reputation, or have a better counterpart, feel free to tell me.
Madbull hopup bucking with fishbone nob
Lonex A1 motor
Basic Gunmaster or Gate standard Mosfet
Lonex drop in gearbox.

Please note I'm getting all this stuff from WGC
"This is the kind of grease I'd put in my girlfriend"
JerryMcGoulBerry is offline   Reply With Quote

Go Back   Airsoft Canada > Information Center > Newbie Tank


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Airsoft Canada

All times are GMT -4. The time now is 10:49.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.