Airsoft Canada
BuyAirsoft

Go Back   Airsoft Canada > Information Center > Newbie Tank
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

VSR-10 stock problem

:

Newbie Tank

Reply
 
Thread Tools Search this Thread
Old December 1st, 2012, 17:42   #1
Joshery
 
Join Date: Dec 2011
Location: Outlook, Saskatchewan
VSR-10 stock problem

(Edit: the problem isn't in the stock)
Hi guys, sorry if I sound like an idiot, but I can't get my VSR-10 barrel/bolt/trigger assembly back into my stock! I'm completely stumped because I've done this about 60 thousand times and helped people do it when they have problems.
I'll post some pictures, but basically: The rear end of the barrel, where the bolt is, fits in fine as usual, but the metal box on the barrel underneath the hop-up is 2-3 cm too far forward so it's keeping me from pushing the barrel down into the gun.
Any input would be greatly appreciated.
Joshery is offline   Reply With Quote
Old December 1st, 2012, 18:22   #2
XZIVR
 
XZIVR's Avatar
 
Join Date: Mar 2011
Location: Calgary, AB
Might be a stupid question but is the barrel screwed in tight to the receiver? That's all I can think of that would cause it to sit THAT far forward..
XZIVR is offline   Reply With Quote
Old December 1st, 2012, 19:43   #3
Joshery
 
Join Date: Dec 2011
Location: Outlook, Saskatchewan
It doesn't seem like it'll go on any tighter, but I can give it a try... I don't want to over tighten it though.
Joshery is offline   Reply With Quote
Old December 1st, 2012, 19:45   #4
XZIVR
 
XZIVR's Avatar
 
Join Date: Mar 2011
Location: Calgary, AB
No, once it shoulders out it's tight. Plus you have to back it off to fit that screw in the bottom anyway.

Are you sure the barrel mounting block is on properly as well?
XZIVR is offline   Reply With Quote
Old December 1st, 2012, 19:55   #5
Joshery
 
Join Date: Dec 2011
Location: Outlook, Saskatchewan
Yea, it's on right.
Joshery is offline   Reply With Quote
Old December 1st, 2012, 20:14   #6
R.I.T.Z
Crackers
 
Join Date: Mar 2009
Location: Barrie
got any photos?
__________________
"You know what the chain of command is? It's the chain I go get and beat you with 'til ya understand who's in ruttin' command here."
R.I.T.Z is offline   Reply With Quote
Old December 2nd, 2012, 17:52   #7
Joshery
 
Join Date: Dec 2011
Location: Outlook, Saskatchewan
I unscrewed the outer barrel and wiped off the grease and was able to put it on tighter. Problem solved.
Joshery is offline   Reply With Quote
Old December 2nd, 2012, 17:57   #8
XZIVR
 
XZIVR's Avatar
 
Join Date: Mar 2011
Location: Calgary, AB
uhh, look at a ruler dude, no way that would make it sit forward 2-3cm.. maybe you meant mm?
XZIVR is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Information Center > Newbie Tank

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
BuyAirsoft

All times are GMT -4. The time now is 06:42.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2017, vBulletin Solutions, Inc.