Airsoft Canada

Go Back   Airsoft Canada > Information Center > Newbie Tank
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Overcharging Lipo?


Newbie Tank

Thread Tools Search this Thread
Old September 9th, 2012, 08:56   #16
Join Date: Apr 2011
Originally Posted by ljohns35 View Post
The preset for the lipo charge for 3 cell is 11.1v, I don't know if I'm actually draining them completely since I only play once a week and charge them right after. I bought a pretty damn expensive charger, its an imax dual power charger
If you are charging your battery to 11.1 volts then you are not overcharging it. You can safely charge each cell up to 4.2 volts. So 3x4.2 is 12.6 volts. Your problem might be that your not charging them enough wich makes you think they a not holding their charge for very long.

Also before charging them check the balance in each cell if one is to low that could indicate bad cell. Don't forget to check the balance ounce they are charged also.

With your charger you can monitor wats going on as the battery is charging and see how each cell is reacting.

Whats the ''C'' rating of your battery?
muddertrucker is offline   Reply With Quote
Old September 9th, 2012, 09:40   #17
PrIeSt's Avatar
Join Date: Sep 2008
Location: Anola(ish) MB
Send a message via MSN to PrIeSt Send a message via Skype™ to PrIeSt
Increase the charging amps. The IMAX smart charet will stop charging and say full on the screen. If they're just stopping after 2 hours and it doesn't say full. Your never fully charging them
PrIeSt is offline   Reply With Quote
Old September 9th, 2012, 12:29   #18
Join Date: Sep 2012
The rating for my battery is a 15 C. I can go up to 5 amps so what would a good charging amp be?
ljohns35 is offline   Reply With Quote
Old September 9th, 2012, 14:19   #19
Not Eye Safe
ThunderCactus's Avatar
Join Date: Feb 2007
Location: with less oil industry than eco-hipster Vancouver
I think he means 11.1v is just what shows up on the display
My iMax will ask me to verify the cell count before it starts charging too (displays 3S 11.1v)
Also should be noted, once the battery is AT 12.6v, it's only actually ~70% full. It has to stay at 12.6 for a while longer before it's done charging
I usually charge packs at 1C, but apparently nano techs can handle charging up to 5C
Tamiya connectors suck.
Originally Posted by swatt13 View Post
i never understood why the oil refinery had a brothel... i never see them at the refineries i work at this is bull!
ThunderCactus is offline   Reply With Quote
Old September 11th, 2012, 11:07   #20
Join Date: Sep 2012
i think it might be my gun thats the problem. I tried it again and i only heard a little bitnof movement from within the gun? :/
ljohns35 is offline   Reply With Quote

Go Back   Airsoft Canada > Information Center > Newbie Tank


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Airsoft Canada

All times are GMT -4. The time now is 15:51.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2016, vBulletin Solutions, Inc.