Airsoft Canada

Go Back   Airsoft Canada > Information Center > Newbie Tank
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Old Element FTK, any good?


Newbie Tank

Thread Tools Search this Thread
Old October 31st, 2011, 07:25   #1
SuperCriollo's Avatar
Join Date: Apr 2009
Location: Misssissssuassuaguaggauga
Old Element FTK, any good?

So I found this FTK for only 25 bucks at gunner airsoft (there are others that are even cheaper). My question is, are they worth getting? I was thinking about putting one of these in an A&K Masada.

SuperCriollo is offline   Reply With Quote
Old October 31st, 2011, 09:38   #2
Styrak's Avatar
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
Generally I've found them to be good but sometimes you can get a lemon.
Some people call them pigshit and would never wipe their ass with one, but for me I've found that isn't the case.

Also it looks like that one has the boxed-in teeth reinforced piston, not the lightweight clear one (which aren't bad either though).

Airsoft Sales and Repair/Upgrade Services

Last edited by Styrak; October 31st, 2011 at 09:41..
Styrak is offline   Reply With Quote
Old October 31st, 2011, 11:41   #3
Reckless's Avatar
Join Date: Aug 2008
Location: Ladysmith BC
lock tight the piston head screw, watch the shimming, make sure the teeth to piston angles are good and they are fine for "general purpose" builds ... as long as your not trying to make some extreme psycho build (like 430+ fps and/or 30 some odd bps )

basically... follow all the standard gearbox do's and don'ts, and you should be just fine .. might be a little noisey .. but I've done a couple builds with em both 400fps and 330 fps .. and both builds have been through atleast 10K rounds now with no failures.
Vancouver Island Gun Doc, custom builder.
Leader - M.E.R.C. multi enviroment recon CAVALRY

"SIR!, you've gone mad with power!"
"Ofcourse I have, you ever gone mad without power, it's useless, no one pays any attention"
The Cavalry Comes
Reckless is offline   Reply With Quote
Old October 31st, 2011, 19:14   #4
Join Date: Aug 2010
The MAX tune up kit you choose has extra torque gears. Unless you are pulling a very strong spring, go with the standard. The piston and gears are very nice, better than a lot of expensive brands.
iKliiu is offline   Reply With Quote

Go Back   Airsoft Canada > Information Center > Newbie Tank


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Airsoft Canada

All times are GMT -4. The time now is 20:57.

Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.