Airsoft Canada
www.jsairsoft.com

Go Back   Airsoft Canada > General > General
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Question on my WE M4

:

General

Reply
 
Thread Tools Search this Thread
Old March 5th, 2011, 14:40   #1
Burner1352
 
Join Date: Aug 2005
Location: Barrie,Ontario,Canada
Question on my WE M4

Hey guys,

I got my WE M4 the other day and today was the 1st day I was able to take it out and try it. I ran half a mag through and noticed that the rifle started to chop the BBs and now I can fill the mag, it just starts to spew out the bottom, even though the mag is empty. Please give me some ideas on how to fix these 2 issues. Thanks
Burner1352 is offline   Reply With Quote
Old March 5th, 2011, 21:31   #2
DoctorBadVibez
 
DoctorBadVibez's Avatar
 
Join Date: Jul 2010
Location: Scarborough, Unionville, Stouffville and on a Benetti
What brand BB's are you using? I've seen instances where an inferior bb can get chopped. I'm guessing this is more prevalent when you are using auto?
__________________
"This is my rifle. There are many like it, but this one is mine..." - Maj. Gen. W.H. Rupertus, USMC
DoctorBadVibez is offline   Reply With Quote
Old March 5th, 2011, 21:51   #3
Ballcancer
 
Ballcancer's Avatar
 
Join Date: Oct 2009
Location: Gravenhurst, ON
There is a whole thread dedicated to the WE M4/M16/Scar/416 and it will have the answers your looking for there. Just need to read a bit. Most likely your bb's suck unless you are using a good brand like bastards. Read up on the WETTI technical thread and you will find solutions
__________________
Ballcancer is offline   Reply With Quote
Old March 5th, 2011, 22:06   #4
Burner1352
 
Join Date: Aug 2005
Location: Barrie,Ontario,Canada
The bb's are velocity arms .20. I got them from the same place as the rifle. Yes but it will do it on semi. Also still can't figure out why tge gas keeps spewing out and not going into the mag. It was fine earlier today. I do know I now have a bb stuck in the barrel. Any ideas on how to get it out? Sorry to be a pain, do you have a link? When ever I search it doesn't work for me
Burner1352 is offline   Reply With Quote
Old March 5th, 2011, 22:17   #5
MadMorbius
Administrator Malleus Veto
 
MadMorbius's Avatar
 
Join Date: Jan 2002
Location: Mississauga, Ontario
Send a message via ICQ to MadMorbius
I've heard that .20's are too light for gas guns.
__________________
[/FONT]
Quote:
Originally Posted by Deaf_shooter View Post
what if it model after his?
MadMorbius is offline   Reply With Quote
Old March 5th, 2011, 22:29   #6
Ross
 
Ross's Avatar
 
Join Date: Nov 2009
Location: Winnipeg
Quote:
Originally Posted by Burner1352 View Post
The bb's are velocity arms .20. I got them from the same place as the rifle. Yes but it will do it on semi. Also still can't figure out why tge gas keeps spewing out and not going into the mag. It was fine earlier today. I do know I now have a bb stuck in the barrel. Any ideas on how to get it out? Sorry to be a pain, do you have a link? When ever I search it doesn't work for me
If you are filling the magazine, and nothing is staying in the magazine, just spewing out of the filler valve, then you need to replace, repair, or tighten the filler valve.

If a bb is stuck in the barrel, turn your hop up all the way off, and use an unjamming rod to get it out.

Also make sure you are putting silicone in your mags. They need a lot.
__________________
Ross is offline   Reply With Quote
Old March 5th, 2011, 22:32   #7
Burner1352
 
Join Date: Aug 2005
Location: Barrie,Ontario,Canada
I will try to tightin up the fill up area needle (don't know the name sorry) where is the hop up? The last airsoft gun I had was a glock that I got from syphen a few years ago and I didn't have to do a thing to that gun so this is all new. I didn't know the .20 would be to light. I guess now what would be a better one to try?
Burner1352 is offline   Reply With Quote
Old March 6th, 2011, 12:37   #8
Ross
 
Ross's Avatar
 
Join Date: Nov 2009
Location: Winnipeg
the hop up is on the brass barrel that you see when you pull the charging handle. Are you lubing your gun?
__________________
Ross is offline   Reply With Quote
Old March 6th, 2011, 12:44   #9
ShelledPants
 
ShelledPants's Avatar
 
Join Date: Feb 2008
Location: Toronto, On
Quote:
Originally Posted by Ross View Post
Are you lubing your gun?
THIS.

Read my signature.

Also, for the record, .20g BB's will function flawlessly in WE M4, it's just that at stock speed's of 430+, they tend to go all over the place in terms of accuracy...
__________________


r skal rsa, s er annars vill
f ea fjr hafa. Sjaldan liggjandi lfur
lr um getur n sofandi maur sigur.
ShelledPants is offline   Reply With Quote
Old March 6th, 2011, 12:56   #10
MadMorbius
Administrator Malleus Veto
 
MadMorbius's Avatar
 
Join Date: Jan 2002
Location: Mississauga, Ontario
Send a message via ICQ to MadMorbius
Quote:
Originally Posted by ShelledPants View Post
THIS.

Also, for the record, .20g BB's will function flawlessly in WE M4, it's just that at stock speed's of 430+, they tend to go all over the place in terms of accuracy...
Thanks for clarifying that, appreciated.
__________________
[/FONT]
Quote:
Originally Posted by Deaf_shooter View Post
what if it model after his?
MadMorbius is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > General > General

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
www.jsairsoft.com

All times are GMT -4. The time now is 23:15.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2017, vBulletin Solutions, Inc.