Airsoft Canada
BuyAirsoft

Go Back   Airsoft Canada > Information Center > Newbie Tank
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Suppressor/Silencer with Bolt Action Spring Rifles

:

Newbie Tank

Reply
 
Thread Tools Search this Thread
Old December 3rd, 2010, 17:59   #1
AoiShikaku
 
AoiShikaku's Avatar
 
Join Date: Nov 2010
Location: Toronto, Ont.
Suppressor/Silencer with Bolt Action Spring Rifles

Hi,

Before I start I'm pretty well aware of the noise that travels through the hallow case, and the noise that is caused from the piston going outward. So for this experiment lets just say you put a pillow over it and wrapped up the entire gun in sound proofing foam all around it except the barrel's end. So the noise that is being produced is from the barrel end.

Since there are a vast number of suppressors/silencers out there what would you recommend to help silence the noise from the barrel end as best as possible. I've seen so many variations out there and have seen some of them disassembled and are pretty much junk. I'm kinda looking for the best that will reduce the noise... so multi-walled, sound proof foam pads, perfect diameter, etc. anything that will reduce sound to it's maximum limit.

What can you guys recommend and why? (please don't mention home made solutions. I am currently working on a project and don't want to add this to my plate.)
AoiShikaku is offline   Reply With Quote
Old December 3rd, 2010, 18:09   #2
Amos
 
Amos's Avatar
 
Join Date: Aug 2006
Location: Tokushima, Japan
Send a message via MSN to Amos
My vsr:

body cavities filled with melted hot glue

9" foam filled silencer

it's very quiet.
__________________
Custom Builds:
FA3674U
Krinkov
G3SD6
Amos is offline   Reply With Quote
Old December 3rd, 2010, 18:22   #3
burningashes
cumpulsive masturbator
 
burningashes's Avatar
 
Join Date: Aug 2008
I think you can try to modify the inside of the piston with a cut out sorbo pad. Just an idea.
burningashes is offline   Reply With Quote
Old December 3rd, 2010, 19:54   #4
Styrak
 
Styrak's Avatar
 
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
Quote:
Originally Posted by burningashes View Post
I think you can try to modify the inside of the piston with a cut out sorbo pad. Just an idea.
I'm not sure what putting anything inside a piston would do?
__________________

Airsoft Sales and Repair/Upgrade Services
Styrak is offline   Reply With Quote
Old December 3rd, 2010, 20:09   #5
HKGhost
 
HKGhost's Avatar
 
Join Date: Nov 2009
Location: Mississauga, ON
Quote:
Originally Posted by Amos View Post
My vsr:

body cavities filled with melted hot glue

9" foam filled silencer

it's very quiet.
Why hot glue? Couldn't you use ridged spray foam to fill the void? Or mix a batch of epoxy to fill?
__________________
Please email me as I'm not on ASC too often.

Custom Build | Upgrades | Repairs | Maintenance
Contact: ghostgunwork@gmail.com / Private Message
HKGhost is offline   Reply With Quote
Old December 3rd, 2010, 21:31   #6
DarkAngel
* Age Verifier status suspended *
 
DarkAngel's Avatar
 
Join Date: Jun 2006
Location: Scarborough
Send a message via MSN to DarkAngel
Quote:
Originally Posted by burningashes View Post
Oh right.. I meant bolt.
They already have sorbo pads made specifically for BA's

Theres a reason most Experienced BA Owners will not put a sorbo pad in their BA.

Lets see if anyone can figure it out.

Hints :
It involves the physical properties of the material.
It is directly related to the accuracy of the rifle.
__________________

Certified Sniper Clinic Instructor and Counter Sniper
Sentinel Arms Customs - Specializing In Unique, One of a kind guns

Last edited by DarkAngel; December 3rd, 2010 at 23:26..
DarkAngel is offline   Reply With Quote
Old December 3rd, 2010, 23:19   #7
burningashes
cumpulsive masturbator
 
burningashes's Avatar
 
Join Date: Aug 2008
Quote:
Originally Posted by Styrak View Post
I'm not sure what putting anything inside a piston would do?
Oh right.. I meant bolt.
burningashes is offline   Reply With Quote
Old December 3rd, 2010, 23:58   #8
AoiShikaku
 
AoiShikaku's Avatar
 
Join Date: Nov 2010
Location: Toronto, Ont.
so... trying to steer our way back to what was asked...

Anyone on suppressors?
AoiShikaku is offline   Reply With Quote
Old December 4th, 2010, 08:49   #9
Amos
 
Amos's Avatar
 
Join Date: Aug 2006
Location: Tokushima, Japan
Send a message via MSN to Amos
Quote:
Originally Posted by HKGhost View Post
Why hot glue? Couldn't you use ridged spray foam to fill the void? Or mix a batch of epoxy to fill?
spray foam leaves small air pockets, mixing enough epoxy to fill the buttstock of a VSR-10 is a huge pain in the ass and MUCH more permanent than hot glue if I ever choose to change it.
__________________
Custom Builds:
FA3674U
Krinkov
G3SD6
Amos is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Information Center > Newbie Tank

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
BuyAirsoft

All times are GMT -4. The time now is 23:38.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2017, vBulletin Solutions, Inc.