Airsoft Canada
https://blackblitzairsoft.myshopify.com/

Go Back   Airsoft Canada > Information Center > Newbie Tank
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Replacing selector switch

:

Newbie Tank

Reply
 
Thread Tools Search this Thread
Old May 23rd, 2010, 18:42   #16
Gunny_McSmith
a.k.a. Palucol
 
Gunny_McSmith's Avatar
 
Join Date: Mar 2008
Location: MTL
but if you cant wait to fix it, you could aways do it yourself...

1) the motor plate from the grip
2) remove motor
3) remove grip

4) remove mag catch
5) remove the gearbox pin (its located over the trigger)
6) remove the stock & buffer tube

7) remove the lower receiver

8) take the lower receiver, (put the selector on SEMI before poping the lower off)

9) pop the fake selector lever plate on the right side like (see pic below) (its often superglued in, so be careful, since you have a plastic lower)



10) and finally, insert a screw driver in the hole, to tighten the selector switch screw

11) check if you like it, then reverse the steps to put your gun back :P

PS: dont forget the small tapet plate spring, or you're gun wont fires in Semi auto :P

PPS: here's a guide on how to take appart you're m4/m16 variant

hope it helps
__________________


Quote:
"A workout isn't easy, but neither is being fat, make the right choice"

Last edited by Gunny_McSmith; May 23rd, 2010 at 19:18..
Gunny_McSmith is offline   Reply With Quote
Old May 23rd, 2010, 19:00   #17
Boyso
a.k.a. LastSpartan
 
Boyso's Avatar
 
Join Date: Jul 2009
Location: Québec city
Send a message via MSN to Boyso
You don't remove the cut off lever spring when you take it out the receiver actually ^^

But yeah, it's easy. If it doesn't click, it's because, either it's too slack, or you lost the small spring underneath the selector switch.
__________________
NEW BACON FOR SALE!

"WHEN I DIE
BURY ME
UPSIDE DOWN
SO THE WORLD
CAN KISS MY ASS"
-Platoon

Boyso is offline   Reply With Quote
Old May 23rd, 2010, 19:11   #18
Gunny_McSmith
a.k.a. Palucol
 
Gunny_McSmith's Avatar
 
Join Date: Mar 2008
Location: MTL
Quote:
Originally Posted by LastSpartan View Post
You don't remove the cut off lever spring when you take it out the receiver actually ^^

But yeah, it's easy. If it doesn't click, it's because, either it's too slack, or you lost the small spring underneath the selector switch.
it could always pop off... :P
__________________


Quote:
"A workout isn't easy, but neither is being fat, make the right choice"
Gunny_McSmith is offline   Reply With Quote
Old May 23rd, 2010, 19:15   #19
Boyso
a.k.a. LastSpartan
 
Boyso's Avatar
 
Join Date: Jul 2009
Location: Québec city
Send a message via MSN to Boyso
Yeah, just to add, put the selector on semi before popping out the GB, much easier.
__________________
NEW BACON FOR SALE!

"WHEN I DIE
BURY ME
UPSIDE DOWN
SO THE WORLD
CAN KISS MY ASS"
-Platoon

Boyso is offline   Reply With Quote
Old May 23rd, 2010, 19:18   #20
Gunny_McSmith
a.k.a. Palucol
 
Gunny_McSmith's Avatar
 
Join Date: Mar 2008
Location: MTL
Quote:
Originally Posted by LastSpartan View Post
Yeah, just to add, put the selector on semi before popping out the GB, much easier.
thx... edited my post.. :P
__________________


Quote:
"A workout isn't easy, but neither is being fat, make the right choice"
Gunny_McSmith is offline   Reply With Quote
Old May 23rd, 2010, 21:31   #21
Brokenwings
 
Join Date: Apr 2010
Location: Ottawa, Orleans (Ontario)
Shit that is epic confusing for a total noob (me) O.O

...

O.O http://www.mechbox.com/m4m16/m733-disassembly.html

From there on, what do i have to do? (at the end of the vid)

Help form there would be pretty much better for me. lmao sorry, and thanks? :P
Brokenwings is offline   Reply With Quote
Old May 23rd, 2010, 21:45   #22
Boyso
a.k.a. LastSpartan
 
Boyso's Avatar
 
Join Date: Jul 2009
Location: Québec city
Send a message via MSN to Boyso
Have you removed the gearbox from the receiver? Don't open the gearbox, if you don't intend to upgrade it.

If you have removed the gearbox from the receiver, simply tighten the screw.

Take pictures if you can, could help us guide you thru it.
__________________
NEW BACON FOR SALE!

"WHEN I DIE
BURY ME
UPSIDE DOWN
SO THE WORLD
CAN KISS MY ASS"
-Platoon

Boyso is offline   Reply With Quote
Old May 23rd, 2010, 23:52   #23
Brokenwings
 
Join Date: Apr 2010
Location: Ottawa, Orleans (Ontario)
Sounds good, pics will be up by tmmrw, watching season finale of Lost lmao
Brokenwings is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Information Center > Newbie Tank

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://blackblitzairsoft.myshopify.com/

All times are GMT -4. The time now is 08:44.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2017, vBulletin Solutions, Inc.