Airsoft Canada
https://blackblitzairsoft.myshopify.com/

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

KSC G19 metal slide issues

:

Doctor's Corner

Reply
 
Thread Tools
Old August 2nd, 2007, 18:06   #1
Renegade)
A Total Bastard
 
Renegade)'s Avatar
 
Join Date: Apr 2006
Location: Tottenham, Ontario
KSC G19 metal slide issues

Well, been confering with Stalker on this for the duration of the morning, Im not sure what could be the issue and hes pondering it over so lets see if anyone else has any ideas whats going on or how to fix it.

Unknown make of slide, its been polished so there are no trades out or in. Its a solid slide tho with a good weight to it. Installation of valve assembly was smooth, no issues it went right in.. However go to fire it with both my mags, it does the following:

Shoots one or more bb's while jamming the valve plunger in the mag so the gas releases prematurely after the shot. Will not stop till I remove the mag and recock, does it again after a shot or first one. Switch back to plastic and it fires fine.

Shoots normal, but does no re rack the hammer and slide to shoot again.

I shaved down the lips around the valve peice as they werent sitting as flush as they should, and was causing some interference in the slide with the lower(when u rack it, it would stick a bit)

AS of right now, still is doing these even with the flush rails inside, I am not sure whats going on at all.

Anyone?
__________________
W1-5
Renegade) is offline   Reply With Quote
Old August 2nd, 2007, 18:49   #2
CDN_Stalker
Official ASC Bladesmith
 
CDN_Stalker's Avatar
 
Join Date: Jul 2003
Location: Ottawa, Ont.
Send a message via MSN to CDN_Stalker
He's already picked my brain over this today, and I'm out of suggestions, am baffled.
CDN_Stalker is offline   Reply With Quote
Old August 2nd, 2007, 19:09   #3
Renegade)
A Total Bastard
 
Renegade)'s Avatar
 
Join Date: Apr 2006
Location: Tottenham, Ontario
Quote:
Originally Posted by CDN_Stalker View Post
He's already picked my brain over this today, and I'm out of suggestions, am baffled.
Finally! Found something the Stalk man couldnt figure out! ... Wait, thats not good for me haha
__________________
W1-5
Renegade) is offline   Reply With Quote
Old August 2nd, 2007, 19:12   #4
CDN_Stalker
Official ASC Bladesmith
 
CDN_Stalker's Avatar
 
Join Date: Jul 2003
Location: Ottawa, Ont.
Send a message via MSN to CDN_Stalker
Quote:
Originally Posted by Renegade) View Post
Finally! Found something the Stalk man couldnt figure out! ... Wait, thats not good for me haha
Bingo!
CDN_Stalker is offline   Reply With Quote
Old August 2nd, 2007, 23:56   #5
lupo
 
lupo's Avatar
 
Join Date: Dec 2001
Location: vancouver
Quote:
Originally Posted by Renegade) View Post
I shaved down the lips around the valve peice as they werent sitting as flush as they should, and was causing some interference in the slide with the lower(when u rack it, it would stick a bit)
Anyone?
Judging by your this comment it could be an older g19 slide , where the valve attachment post was too high. If this is the case , filing the valve flush wasent the cure. Filing down the post is what you needed to do because the whole valve mechanism would be sitting to high. If you have MSN my contact is lupo_bcac@hotmail.com
lupo is offline   Reply With Quote
Old August 3rd, 2007, 01:22   #6
Renegade)
A Total Bastard
 
Renegade)'s Avatar
 
Join Date: Apr 2006
Location: Tottenham, Ontario
Stalker you have yourself a rival man! jk, your both great! Lupo guided me through some steps with shaving the screw tower on the slide down, placing a regular shim in there, and after some more adjusting and work, its not firing pretty much A OK!!

Thanks very much lupo.
__________________
W1-5
Renegade) is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://blackblitzairsoft.myshopify.com/

All times are GMT -4. The time now is 05:41.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.