Wei-Tech Hi-Capa Full Metal CS Version ~ NEW

Nocturnal · September 8th, 2005, 11:29

Barrett · September 8th, 2005, 19:06

i gotta get me one of those, very nice.
wat the price tag on one of those?

mcguyver · September 8th, 2005, 20:15

canadian airsoft $299 and all three models instock and co2 mags also.

btw i have one and it shoots around 400 fps on green gas and way over that on co2. lnearly drew blood on archer6 and he's a tough hombre.

Skruface · September 8th, 2005, 21:34

What's "CS version"? CounterStrike???!!one

Nocturnal · September 8th, 2005, 23:52

i think it stands for 'Competition Style'

thePiRaTE!! · September 9th, 2005, 02:56

I recently purchased a TM Hi-Capa and am enjoying it, but am considering metal upgrades. The price of this Wei-Tech inclusive of metal makes upgrading the TM seem like a bad idea... what advantages or disadvantages are there between these two units stock?

thePiRaTE!! · September 9th, 2005, 04:16

Ok, basically answered my own question, but I thought I'd share.

First, here is a detailed review of the Wei-Tech 5.1, including mention of a few construction issues:

http://www.airsplat.com/hicapa.htm

Then I took photos similar to the ones found in the above review to detail the difference. The problems mentioned in the review regarding the Wie-T are not found in the TM. Inner barrel fit is snug; hammer is well crafted, cast and finished; the dual safety is properly balanced and works correctly from either side.

- note the metal beaver tail rear safety, metal dual safety, hammer, lower receiver, bomars. Theres lots of metal even on the stock TM. Metal mag release, slide catch, user mountable lower rail and the guide rod, along with much of the internal structure make for a very solid feel. Still, only half the slide action is metal on a stock TM Hi Capa and it sounds that way - half metal, though chunky nonetheless.

From the clues here and with other cloned guns, it seems the Japanese made items gives a higher degree of precision. Is more metal worth the trade-off of less precise manufacturing specs? I suppose that varies by user.

ILLusion · September 9th, 2005, 11:50

From what I've seen of the WE Hi-Capas, I've also noticed that the fit and finish are not equivalent to that of the Marui.

Personally, I'd rather drop the extra coin on the Marui and upgrade it to full metal. It looks better in the end, feels better... and shoots better as the outer barrel does not wobble around as much.

I never got to shoot the WE I handled, but looking at that airsplat.com review, the groupings @ 5m & 10m shown in the photos aren't very impressive at all.
At 22 feet, my (tuned) Hi-Capa is capable of 2" groupings

Don't get me wrong, the WE isn't garbage. As a Taiwanese gun, it's among the best in it's league and as a straight out-of-the box gun, it's a greater performer for a great price.

manchovie · September 9th, 2005, 13:50

i owned one for a short period of time and i have to say i'm not impressed. the gun is built around the marui internals which are for pushing a light slide at extreme speed. what they did was use the same internals with a lead alloy slide. sure it feels nice, but the thing is ridiculously heavy and recoil is very forceful, but too sluggish. also, if you fire quickly the cooldown is so strong there's just about no way you can finish the mag before running out of gas. there are small tricks you can use to fix this issue (trim the reed valve spring) but they dont obliterate the problem.

accuracy however was good because it's modeled after the tm style hopup, maybe not crafted as well but damn effective compared to the old WA style hop.

since i've got all of airsoft innovation's stock at my house, i got to take a look at some of the metal slides available for the hicapa and lord god jesus are they sweet. milled aluminium kicks cast lead alloy's ass any day. plus they have trades :P and the tm hicapa doesnt have that silly shiny sticker on the grip.

ABRAXAAS · September 18th, 2005, 01:58

I have 2 I think there great havnt had any problems, there solid fire fast , great blowback nice weight and dead sexy.

Scavenger · September 18th, 2005, 02:28

Just curious, how does this compare to the KJ Para in terms of construction and quality? These look pretty damn good, and i'm interested getting one

The KJ Para i have fires quite reliably, and i havent had any issues with gas blowing out of the mags and such under propane.... this firing CO2 i'd imagine the build would have to be a bit tougher to sustain the higher pressure and such. Only drawback with the higher pressure gas is that these are not suitable for indoor

Also curious about interchanging of certain parts with others, this being a clone of the Marui HiCapa, maybe swapping out some stuff with after market ones made for the Marui to take advantage of better quality where possible....

Got any of these Tru?

mcguyver · September 18th, 2005, 09:46

i can hit a 3/4" steel rod driven into our field at 30 feet distance from our mesh barrier about %50 of the time 15/31 shots with the w.e. can't do that with my ksc g19 or usp compact.

Rumpel Felt · September 18th, 2005, 14:02

I'd buy this gun just because it's nice and metal. I'll never buy a TM GBB or WA unless they are my only choice for a gun. As nice as they may look, they are still just plastic and fo rme, that just blows all the pride right out of the water.

They say the slide has lead in this gun? Can I draw with it too? haha

ABRAXAAS · September 19th, 2005, 00:59

I like mine, I used it in a game on saturday and it performed well, although its true that it doesnt finish off a full mag it eats gas.

But it does hold 30 rds so the 2 or 3 left in is alright with me for the fun value and the price value.

Gooseman · September 19th, 2005, 02:22

I had a chance to test a friend's WE Hi-Capa out and I found the slide/frame fit to be exceptional. There was VERY little slide wobble on the one I had. Accuracy was also very good. I definately thought it was on par with the TM Hi-Capa in that regard. Taking it apart, the internals are all modelled after the TM Hi-Capa to a high degree. I was very impressed with the gun when I had it and I would have bought one of my own if i didn't already have a TM Hi-Capa. The kick on it was surprisingly satisfying given the fact that the weight of the slide was so heavy. It's definately not as snappy as my TM Hi-Capa but still very beefy nonetheless. This gun was definately one of the heaviest guns I've handled...
And to whomever quoted the gun as shooting 400 fps must have been shooting from the sun. I chrono'ed mine at around 310 fps indoors. Temperature was probably about 15 celsius.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

September 8th, 2005, 11:29	#1
Nocturnal oO? Trader rating Join Date: Feb 2004 Location: Stouffville, ON	Wei-Tech Hi-Capa Full Metal CS Version ~ NEW __________________ *"SI VIS PACEM, PARA BELLUM"*

September 8th, 2005, 19:06	#2
Barrett Trader rating Join Date: Sep 2004	i gotta get me one of those, very nice. wat the price tag on one of those? __________________ newb

September 8th, 2005, 23:52	#5
Nocturnal oO? Trader rating Join Date: Feb 2004 Location: Stouffville, ON	i think it stands for 'Competition Style' __________________ *"SI VIS PACEM, PARA BELLUM"*

September 8th, 2005, 20:15	#3
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	canadian airsoft $299 and all three models instock and co2 mags also. btw i have one and it shoots around 400 fps on green gas and way over that on co2. lnearly drew blood on archer6 and he's a tough hombre.

September 9th, 2005, 02:56	#6
thePiRaTE!! Trader rating Join Date: Aug 2005 Location: Calgary	I recently purchased a TM Hi-Capa and am enjoying it, but am considering metal upgrades. The price of this Wei-Tech inclusive of metal makes upgrading the TM seem like a bad idea... what advantages or disadvantages are there between these two units stock?

September 9th, 2005, 04:16	#7
thePiRaTE!! Trader rating Join Date: Aug 2005 Location: Calgary	Ok, basically answered my own question, but I thought I'd share. First, here is a detailed review of the Wei-Tech 5.1, including mention of a few construction issues: http://www.airsplat.com/hicapa.htm Then I took photos similar to the ones found in the above review to detail the difference. The problems mentioned in the review regarding the Wie-T are not found in the TM. Inner barrel fit is snug; hammer is well crafted, cast and finished; the dual safety is properly balanced and works correctly from either side. - note the metal beaver tail rear safety, metal dual safety, hammer, lower receiver, bomars. Theres lots of metal even on the stock TM. Metal mag release, slide catch, user mountable lower rail and the guide rod, along with much of the internal structure make for a very solid feel. Still, only half the slide action is metal on a stock TM Hi Capa and it sounds that way - half metal, though chunky nonetheless. From the clues here and with other cloned guns, it seems the Japanese made items gives a higher degree of precision. Is more metal worth the trade-off of less precise manufacturing specs? I suppose that varies by user.

September 9th, 2005, 11:50	#8
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	From what I've seen of the WE Hi-Capas, I've also noticed that the fit and finish are not equivalent to that of the Marui. Personally, I'd rather drop the extra coin on the Marui and upgrade it to full metal. It looks better in the end, feels better... and shoots better as the outer barrel does not wobble around as much. I never got to shoot the WE I handled, but looking at that airsplat.com review, the groupings @ 5m & 10m shown in the photos aren't very impressive at all. At 22 feet, my (tuned) Hi-Capa is capable of 2" groupings Don't get me wrong, the WE isn't garbage. As a Taiwanese gun, it's among the best in it's league and as a straight out-of-the box gun, it's a greater performer for a great price. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

September 9th, 2005, 13:50	#9
manchovie Trader rating Join Date: Dec 2003 Location: Toronto	i owned one for a short period of time and i have to say i'm not impressed. the gun is built around the marui internals which are for pushing a light slide at extreme speed. what they did was use the same internals with a lead alloy slide. sure it feels nice, but the thing is ridiculously heavy and recoil is very forceful, but too sluggish. also, if you fire quickly the cooldown is so strong there's just about no way you can finish the mag before running out of gas. there are small tricks you can use to fix this issue (trim the reed valve spring) but they dont obliterate the problem. accuracy however was good because it's modeled after the tm style hopup, maybe not crafted as well but damn effective compared to the old WA style hop. since i've got all of airsoft innovation's stock at my house, i got to take a look at some of the metal slides available for the hicapa and lord god jesus are they sweet. milled aluminium kicks cast lead alloy's ass any day. plus they have trades :P and the tm hicapa doesnt have that silly shiny sticker on the grip. __________________ experienced toronto gun doctor, hundreds of guns serviced manchovie gun doc thread! my b/s rating

September 18th, 2005, 01:58	#10
ABRAXAAS Trader rating Join Date: Jan 2003 Location: Vancouver	I have 2 I think there great havnt had any problems, there solid fire fast , great blowback nice weight and dead sexy.

September 18th, 2005, 02:28	#11
Scavenger Scatter-Shot Trader rating Join Date: Jul 2003 Location: Scarberia, ON	Just curious, how does this compare to the KJ Para in terms of construction and quality? These look pretty damn good, and i'm interested getting one The KJ Para i have fires quite reliably, and i havent had any issues with gas blowing out of the mags and such under propane.... this firing CO2 i'd imagine the build would have to be a bit tougher to sustain the higher pressure and such. Only drawback with the higher pressure gas is that these are not suitable for indoor Also curious about interchanging of certain parts with others, this being a clone of the Marui HiCapa, maybe swapping out some stuff with after market ones made for the Marui to take advantage of better quality where possible.... Got any of these Tru? __________________ Team GHOSTS - Fides et Amicitia G = √-1 Smooth Operator Operating Correctly.

September 18th, 2005, 09:46	#12
mcguyver Trader rating Join Date: Aug 2005 Location: Northern Alberta	i can hit a 3/4" steel rod driven into our field at 30 feet distance from our mesh barrier about %50 of the time 15/31 shots with the w.e. can't do that with my ksc g19 or usp compact.

September 18th, 2005, 14:02	#13
Rumpel Felt Trader rating Join Date: Jul 2004 Location: Kitchener, Ontario	I'd buy this gun just because it's nice and metal. I'll never buy a TM GBB or WA unless they are my only choice for a gun. As nice as they may look, they are still just plastic and fo rme, that just blows all the pride right out of the water. They say the slide has lead in this gun? Can I draw with it too? haha

September 19th, 2005, 00:59	#14
ABRAXAAS Trader rating Join Date: Jan 2003 Location: Vancouver	I like mine, I used it in a game on saturday and it performed well, although its true that it doesnt finish off a full mag it eats gas. But it does hold 30 rds so the 2 or 3 left in is alright with me for the fun value and the price value.

September 19th, 2005, 02:22	#15
Gooseman Trader rating Join Date: Mar 2003 Location: if u dont like my sidewalk, get off my driving	I had a chance to test a friend's WE Hi-Capa out and I found the slide/frame fit to be exceptional. There was VERY little slide wobble on the one I had. Accuracy was also very good. I definately thought it was on par with the TM Hi-Capa in that regard. Taking it apart, the internals are all modelled after the TM Hi-Capa to a high degree. I was very impressed with the gun when I had it and I would have bought one of my own if i didn't already have a TM Hi-Capa. The kick on it was surprisingly satisfying given the fact that the weight of the slide was so heavy. It's definately not as snappy as my TM Hi-Capa but still very beefy nonetheless. This gun was definately one of the heaviest guns I've handled... And to whomever quoted the gun as shooting 400 fps must have been shooting from the sun. I chrono'ed mine at around 310 fps indoors. Temperature was probably about 15 celsius.

Wei-Tech Hi-Capa Full Metal CS Version ~ NEW

Airsoft Guns Discussion