CA36K - Guide & Review ( 100 pics )

manchovie · February 1st, 2006, 17:39

did you have to quote the whole thing including pics just to say the same thing as everyone else?

Armedpacifist · February 1st, 2006, 19:21

Why does anyone have to do anything?

Because jesus told me to do it.

manchovie · February 2nd, 2006, 10:10

well if it was a good enough reason for the crusades, it's a good enough reason for this.

Raygis LasVegas · February 2nd, 2006, 11:51

halieleuyah! Even God appreciates my CA36K review!

Anyone who wants me to review their stuff, send me a PM!!!!!!!!!

mist3r_frag · March 10th, 2006, 14:18

Hey first off, great review! I just picked up this same gun and was wondering what barrel you used? I found a couple that make it about half way to the flash hider but not one that goes all the way to the end. Did you custom cut a PSG1 or AUG barrel or something? Any help would be great. Thx. in advance.

MI6 · May 14th, 2006, 00:43

About the ironsights on the top of the carry handle, how are you supposed to use them if there not ajustable. If the gun isnt perfectly lined up from the factory you are screwed. Is it ever possible to mount other iron sight on the top, i see holes there...?

Raygis LasVegas · May 15th, 2006, 17:34

The iron sights are moulded relatively straight with the bore... at least on my rifle. I don't think it's practical to mount iron sights on top of the scope b/c it would make the cheek weld too high (that is, if its possible to have that high of a cheek weld).

MI6 · May 16th, 2006, 20:57

got any pics of you holding that thing?

malcr001 · August 1st, 2006, 18:28

Great review, can the G&P stock use any normal battery if I use tamiya connectors instead of dean's connectors? Would the battery need a gap between the 2nd and 4th battery like the intended batterys for this stock?

Raygis LasVegas · August 2nd, 2006, 10:55

The stock can use any normal battery with a tamiya connector. However, because of the tamiya's size, you'll find installing the battery less than ideal.

The gap between the 2nd and 4th cell is required to lock the stock when it's folded. This gap is for the brass deflector to protrude through. If you don't intend to fold the stock, then you can use virtually any normal "rectangular" shaped battery.

malcr001 · August 2nd, 2006, 15:56

Oh ok, I will want to fold the stock every so often, I think it would be best for me to use the intended stock batterys but replace the deans connectors on the battery with tamiya connectors that way I can change back to using the battery in the hand guard when ever I want a change without having to do any soldering.

freeman · September 6th, 2006, 14:50

Can you replace the CA stock spring guide with a Systema or Guarder V3. bearing spring guide ?

I 've tried both bearing spring guide,and they don't fit in at all.

Anyone got the same problem?or it is just mine :sad:

The Saint · September 6th, 2006, 16:24

That's odd, my Guarder bearing spring guide fit, Raygis was the one who did the work. But my CA mechbox also had some imperfections that I doubt is shared by all other CA boxes, so it could be shoddy QA on CA's part?

Trader rating · December 23rd, 2007, 11:47

Hi

Today i have found interesting site

It is a amazing site!

...

skalnok · December 23rd, 2007, 18:05

reported, at least it brought a good review back to the top.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 1st, 2006, 17:39	#16
manchovie Trader rating Join Date: Dec 2003 Location: Toronto	did you have to quote the whole thing including pics just to say the same thing as everyone else? __________________ experienced toronto gun doctor, hundreds of guns serviced manchovie gun doc thread! my b/s rating

February 2nd, 2006, 10:10	#18
manchovie Trader rating Join Date: Dec 2003 Location: Toronto	well if it was a good enough reason for the crusades, it's a good enough reason for this. __________________ experienced toronto gun doctor, hundreds of guns serviced manchovie gun doc thread! my b/s rating

February 2nd, 2006, 11:51	#19
Raygis LasVegas Trader rating Join Date: Dec 2002 Location: Toronto	halieleuyah! Even God appreciates my CA36K review! Anyone who wants me to review their stuff, send me a PM!!!!!!!!! __________________ . AEG upgrades & repairs: $25/hr

February 1st, 2006, 19:21	#17
Armedpacifist Trader rating Join Date: Feb 2003 Location: Ontario	Why does anyone have to do anything? Because jesus told me to do it.

March 10th, 2006, 14:18	#20
mist3r_frag Trader rating Join Date: Mar 2006 Location: International	Hey first off, great review! I just picked up this same gun and was wondering what barrel you used? I found a couple that make it about half way to the flash hider but not one that goes all the way to the end. Did you custom cut a PSG1 or AUG barrel or something? Any help would be great. Thx. in advance.

May 14th, 2006, 00:43	#21
MI6 Trader rating Join Date: Mar 2005 Location: calgary	About the ironsights on the top of the carry handle, how are you supposed to use them if there not ajustable. If the gun isnt perfectly lined up from the factory you are screwed. Is it ever possible to mount other iron sight on the top, i see holes there...? __________________ Do you expect me to talk? No Mr. Bond, I expect you to die.

May 15th, 2006, 17:34	#22
Raygis LasVegas Trader rating Join Date: Dec 2002 Location: Toronto	The iron sights are moulded relatively straight with the bore... at least on my rifle. I don't think it's practical to mount iron sights on top of the scope b/c it would make the cheek weld too high (that is, if its possible to have that high of a cheek weld). __________________ . AEG upgrades & repairs: $25/hr

May 16th, 2006, 20:57	#23
MI6 Trader rating Join Date: Mar 2005 Location: calgary	got any pics of you holding that thing? __________________ Do you expect me to talk? No Mr. Bond, I expect you to die.

August 1st, 2006, 18:28	#24
malcr001 Trader rating Join Date: Aug 2006 Location: london	Great review, can the G&P stock use any normal battery if I use tamiya connectors instead of dean's connectors? Would the battery need a gap between the 2nd and 4th battery like the intended batterys for this stock?

August 2nd, 2006, 10:55	#25
Raygis LasVegas Trader rating Join Date: Dec 2002 Location: Toronto	The stock can use any normal battery with a tamiya connector. However, because of the tamiya's size, you'll find installing the battery less than ideal. The gap between the 2nd and 4th cell is required to lock the stock when it's folded. This gap is for the brass deflector to protrude through. If you don't intend to fold the stock, then you can use virtually any normal "rectangular" shaped battery. __________________ . AEG upgrades & repairs: $25/hr

August 2nd, 2006, 15:56	#26
malcr001 Trader rating Join Date: Aug 2006 Location: london	Oh ok, I will want to fold the stock every so often, I think it would be best for me to use the intended stock batterys but replace the deans connectors on the battery with tamiya connectors that way I can change back to using the battery in the hand guard when ever I want a change without having to do any soldering.

September 6th, 2006, 14:50	#27
freeman Trader rating Join Date: Mar 2006 Location: Vancouver	Can you replace the CA stock spring guide with a Systema or Guarder V3. bearing spring guide ? I 've tried both bearing spring guide,and they don't fit in at all. Anyone got the same problem?or it is just mine :sad: __________________

September 6th, 2006, 16:24	#28
The Saint Trader rating Join Date: Jan 2005 Location: Quebec	That's odd, my Guarder bearing spring guide fit, Raygis was the one who did the work. But my CA mechbox also had some imperfections that I doubt is shared by all other CA boxes, so it could be shoddy QA on CA's part? __________________ "The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."

December 23rd, 2007, 11:47	#29
Amenearnern Guest Trader rating	Make money online-this is real ! Hi Today i have found interesting site It is a amazing site! ... Last edited by Cortexburn; December 23rd, 2007 at 18:12.. Reason: spam
	$Received Infraction$

CA36K - Guide & Review ( 100 pics )

Reviews