VSR-10 stock problem
(Edit: the problem isn't in the stock)
Hi guys, sorry if I sound like an idiot, but I can't get my VSR-10 barrel/bolt/trigger assembly back into my stock! I'm completely stumped because I've done this about 60 thousand times and helped people do it when they have problems.
I'll post some pictures, but basically: The rear end of the barrel, where the bolt is, fits in fine as usual, but the metal box on the barrel underneath the hop-up is 2-3 cm too far forward so it's keeping me from pushing the barrel down into the gun.
Any input would be greatly appreciated.