Airsoft Canada
www.jsairsoft.com

Go Back   Airsoft Canada > Discussion > Doctor's Corner > Gas Gun Solutions
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Dismantled my WA M92F and I can't figure out where this piece goes

:

Gas Gun Solutions

Reply
 
Thread Tools
Old July 23rd, 2006, 19:00   #1
Homi-Wan
 
Join Date: Sep 2003
Location: Coquitlam, BC
Dismantled my WA M92F and I can't figure out where this piece goes

So my M9 essentially got submerged in sand the other day and I had to take it apart completely to get it cleaned out. I was able to piece it all back together except for one piece.

It's some kind of tension wire but the exact placement I'm unsure of. When I dissasembled the gun it popped out.

If anyone could help me out with that's be great. The diagram in my manual doesn't help much. It just shows the piece hovering on the right side of the gun with no arrow pointing to where it goes. The only help I suppose is it tells me what the orientation of the piece should be, which I've used in the picture here.

Thanks in advance.
Attached Images
File Type: jpg m9piece.jpg (65.8 KB, 92 views)
Homi-Wan is offline   Reply With Quote
Old July 23rd, 2006, 19:14   #2
Greylocks
 
Greylocks's Avatar
 
Join Date: Dec 2001
Location: Gatineau, Quebec (Near Ottawa)
http://www.airsoftcanada.com/showthread.php?t=14505

And it looks like the slide catch tension spring.
Greylocks is offline   Reply With Quote
Old July 23rd, 2006, 19:21   #3
Homi-Wan
 
Join Date: Sep 2003
Location: Coquitlam, BC
Oops my bad. In my desperation I guess I didn't even bother to read any forum stickies. Sorry. If a mod could move this thread back to where it should be this one time - I tried to delete this thread but I couldn't find the option.

But er, back to the topic. I don't think it's for the slide catch since it's on the left side and it's in workikng order. I 'think' this piece has to do with the piece you see above it, which connects the trigger to a peice with releases the hammer. That piece needs to be pressed upwards in order to work, but I just have no idea how it does this.
Homi-Wan is offline   Reply With Quote
Old July 23rd, 2006, 20:26   #4
Greylocks
 
Greylocks's Avatar
 
Join Date: Dec 2001
Location: Gatineau, Quebec (Near Ottawa)
Sorry, to help you further I'd need a Beretta in front of me. Possibly the disconnector spring then.
My eyesight is not what it used to be.

If memory serves right, it should be giving tension to bring the piece forwards after the trigger is released, but it's been a long while.
Greylocks is offline   Reply With Quote
Old July 23rd, 2006, 21:08   #5
bean
2 Cent Tactical
 
bean's Avatar
 
Join Date: Oct 2004
Send a message via MSN to bean
it belongs in the right grip. It supplies pressure tot he arm that pulls the trigger. I found it a bitch to put back when i fixed cowabunga the destroyers gun.
__________________
bean is offline   Reply With Quote
Old July 23rd, 2006, 22:36   #6
Homi-Wan
 
Join Date: Sep 2003
Location: Coquitlam, BC
Thanks all. I finally got it all back together. I made a little mod to the picture so this thread can stay in the solutions section.
Attached Images
File Type: jpg m9piece2.jpg (66.9 KB, 139 views)
Homi-Wan is offline   Reply With Quote
Old July 25th, 2006, 22:10   #7
Operative930
 
Join Date: Dec 2003
I have the same problem with my KJW M9 Elite now that I've installed my new Hogue grips on it. I can't figure out how to put it back in so the lever works again, can anyone help?
__________________
Allison Hawkins: Why do you have that gun, what's it for?
Robert Hawkins: Shooting....and I think it's time you learned how.
Operative930 is offline   Reply With Quote
Old December 19th, 2007, 14:40   #8
eV.Viper
 
Join Date: Jun 2006
Location: Montreal, Quebec
In some addition to the thread.

The spring goes inside the arm for the KJW, there a small hole where it goes inside the arm!!
__________________
Aka Raptor
TM M3 Shorty
KJW Beretta M9
eV.Viper is offline   Reply With Quote
Old January 9th, 2008, 17:17   #9
Crunchmeister
 
Crunchmeister's Avatar
 
Join Date: Nov 2007
Location: In your bedroom going though your underwear drawer
The bar is called the trigger bar. The bottom edge of the trigger bar has a slight groove in it that the spring rests in. You install the spring in the same orientation as shown in the pic above, but with the trigger bar installed in the gun first. Then install the grip.
__________________
Crunchmeister is offline   Reply With Quote
Old February 24th, 2008, 08:23   #10
wotty33
 
Join Date: Feb 2008
has anyone here ever removed the satftey on a kjw m9? i need to take mine off for cleaning, but there appears to be no way to remove it.
wotty33 is offline   Reply With Quote
Old September 20th, 2009, 01:25   #11
aznpos531
 
aznpos531's Avatar
 
Join Date: Jan 2009
Location: Toronto
Quote:
Originally Posted by wotty33 View Post
has anyone here ever removed the satftey on a kjw m9? i need to take mine off for cleaning, but there appears to be no way to remove it.
There should be an allen/hex screw (whatever you wanna call it) at the top of the right hand safety lever. To find it, put the gun on safe and the screw should be facing straight up right beside the rear sight. It should be a 1.5mm screw. Unscrew that, and the right lever should slide off (forward). Someone's gonna have to take over from here cause that's as far as I got before chickening out
I think the other lever just pushes out, but you may want to wait for someone to confirm that.

edit: My bad...didn't look at the post date...=.="
__________________

Quote:
Originally Posted by OptimusPrime View Post
I could never stop going to WalMart. Its the only place I can get good airsoft guns.
aznpos531 is offline   Reply With Quote
Old November 25th, 2009, 15:22   #12
saintlycricket
Lulu Belle
 
Join Date: Aug 2006
Location: Edmonton Alberta
Send a message via MSN to saintlycricket
That little spring is ridiculous. It pushes up the slide catch. it also happens to fly out at you whenever you pop off the grip. FAIL
saintlycricket is offline   Reply With Quote
Old November 25th, 2009, 15:46   #13
arnold869
 
arnold869's Avatar
 
Join Date: Mar 2007
Location: Petawawa, Ontario
Quote:
Originally Posted by Crunchmeister View Post
The bar is called the trigger bar. The bottom edge of the trigger bar has a slight groove in it that the spring rests in. You install the spring in the same orientation as shown in the pic above, but with the trigger bar installed in the gun first. Then install the grip.
If you still can not install it, I take mine apart and take pictures for you. Drop me a pm
__________________
arnold869 is offline   Reply With Quote
Old December 1st, 2009, 03:35   #14
Styrak
 
Styrak's Avatar
 
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
Quote:
Originally Posted by arnold869 View Post
If you still can not install it, I take mine apart and take pictures for you. Drop me a pm
Given an entire year to figure it out, I think he probably got it
__________________

Airsoft Sales and Repair/Upgrade Services
Styrak is offline   Reply With Quote
Old December 1st, 2009, 05:43   #15
TokyoSeven
Red Wine & Adderall
 
TokyoSeven's Avatar
 
Join Date: Oct 2005
Location: Saskatoon, SK
__________________


"Its only a little bit on fire"
TokyoSeven is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner > Gas Gun Solutions

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
www.jsairsoft.com

All times are GMT -4. The time now is 08:34.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.