|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 5th, 2013, 18:53
|
#1 |
|
Help - Fixing mid cap mags
My mags are miss feeding every 3-4 bbs and sometimes 2-3 consecutively…
Help a newbie out, any ways I can fix these without having to buy more mags? Thanks in advance! *Edit these are my mags http://www.airsoftgi.com/product_inf...oducts_id=6496
__________________
Last edited by frapso; June 5th, 2013 at 18:58.. |
|
|
|
|
June 5th, 2013, 19:09
|
#2 |
|
Try cleaning them. Also maybe add about half second spray of silicone oil. Then using your barrel cleaning rod push down the spring a couple of times
|
|
|
|
|
|
June 5th, 2013, 19:10
|
#3 |
|
Correction, quarter second spray. Do not use a lot
|
|
|
|
|
|
June 5th, 2013, 19:10
|
#4 |
|
aka coachster
|
Alternatively, you can open them up, clean the BB track and swab it lightly with a cloth and a drop or two of silicon oil. Then stretch the spring a little bit.
If you don't want to open, then I also have a jar of BB's that I have coated in silicon oil. (Separate loader as well) Load and unload mags a few times. DO NOT SHOOT THESE BB'S. I'll add a couple more drops and swish them around every other mag. Last edited by coach; June 5th, 2013 at 19:13.. |
|
|
|
|
June 5th, 2013, 19:14
|
#5 |
|
If you can't open them up, another method is:
Put 100 bb's in a plastic bag Add a few drops of silicon oil to the bag Mix it up Load those bb's into the magazine Eject them back into the bag. Load them again. Eject them again. Load Fresh BB's. Test in your gun.
__________________
  Ár skal r?*sa, sá er annars vill fé eða fjör hafa. Sjaldan liggjandi úlfur lær um getur né sofandi maður sigur. |
|
|
|
|
June 5th, 2013, 19:48
|
#6 |
|
aka coachster
|
Do I hear an echo?
|
|
|
|
|
June 5th, 2013, 19:49
|
#7 | ||
|
Oh we do hate you, just never felt like wasting the time to give you a user title :P
|
Noone askes the obvious questoon. what bbs are you using?
I know a guy who buys canadian tire and walmart bbs (as much as i ask/tell him not to) and none of his midcaps will feed em properly. He keeps tryin to insists mid caps have crazy feeding issues thats why he uses hicaps. But we discovered if he uses bastards or madbulls they feed fine lol. Otherwise yes the above methods. Also sink full of warm soapy watter slosh em round push the spring with the rod a few times. Rinse em all good lil bit of oil on some bbs and cycle em through the mag and yer all set.
__________________
Quote:
Quote:
FinchFieldAirsoft |
||
|
|
|
|
June 5th, 2013, 23:28
|
#8 |
|
When I had this problem in my RS T56-1 the experienced guys I played with said you should just need to file the moving part that keeps the bb's in the mag a little bit, something about it not being opened fully by the feed nozzle but I didn't get time to try it.
Obviously try this AFTER making sure the internals are clean, use good bb's, check the spring strength (stretch it out a little) and adding a little lube. |
|
|
|
|
|
June 6th, 2013, 13:56
|
#9 |
|
If you don't have a separate loader just load 3 bb's into the mag and spray those bb's with silicone and load the remaining bb's from your loader. It will push all the silicone bb's through and you don't have to worry about a loader full of oil.
|
|
|
|
|
|
June 7th, 2013, 00:55
|
#10 |
|
|
|
|
|
|
June 7th, 2013, 10:20
|
#11 |
|
The BBs i was using was from a local airsoft store - Bioval .2 bio bbs
__________________
|
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
