|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
March 18th, 2010, 15:06
|
#1 |
|
Mixing Gear Ratios
If I mix some high speed gears with standard gears, or high torque (and I'm not talking about helical gears) with standard etc. is this just bound to cause jams/stripped teeth?
Thanks, Alex
__________________
"To invent, you need a good imagination and a pile of junk." - Edison |
|
|
|
March 18th, 2010, 15:28
|
#2 | |
|
Yes.
Ratio means that the size (diameter) and number of teeth on each gear is changed. You can try, but it won't work. At all.
__________________
Quote:
|
|
|
|
|
|
March 18th, 2010, 15:37
|
#3 |
|
Administrator
|
I've replaced many a damaged gear set from owners attempting the same thing. Does not work. Gears will either not have enough surface to engage properly (and will probably strip) or are too tightly packed (binding).
__________________
ASC Age Verifier for Red Deer & Area Alberta |
|
|
|
|
March 18th, 2010, 16:33
|
#4 |
|
|
I figured as much but just wanted to check. Thanks guys.
__________________
"To invent, you need a good imagination and a pile of junk." - Edison |
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
