|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
December 2nd, 2006, 15:26
|
#1 |
|
M4 spring upgrade from stock
I'm thinking of upgrading my M4 to around 320-330 fps. The parts I'm thinking of using are as follows; SP100 spring, Guarder steel bushing set ver.2/ver.3, Guarder Shim Set. I assume my ROF will drop if I still use my 8.4 battery, should I go with a 9.6? The white grease and silicon lubricant I have in my garage, the stuff is from Crappy Tire. Is this setup ok or am I missing something important stuff?
Last edited by conrad13; December 2nd, 2006 at 15:40.. |
|
|
|
December 2nd, 2006, 15:31
|
#2 |
|
GBB Whisperer
|
8.4 should be able to handle that upgrade fine, although ROF will be a tad noticeably slower. It's not necessary to go to 9.6v.
If you're going to use "teh white grease from your garage from Crappy Tire", make sure it's white lithium grease. And don't use that silicon lubricant - it has petroleum distillates in it. |
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
