Airsoft Canada - View Single Post - Real Sword 56-2 upgrade ideas

Kid · March 13th, 2011, 23:52

All great answers.

I've got a guarder clear, Shredders Concave Spacer, and a prometheus tightbore.

The only other upgrades I've done are installing a mosfet (for rof control), 11.1v lipo (for trigger response), and a bearing spring guide. None of those effect accuracy though.

As for the battery, 7.2v lipos are a great option. Modding the gas tube though is pretty simple though. just have to expand the cutout on the bottom of the gas tube by a few millimeters and you'll get batteries in much easier.

Scope - hardly necessary unless your vision requires it.

March 13th, 2011, 23:52	#3
Kid Trader rating Join Date: Feb 2005 Location: Moose Jaw, SK	All great answers. I've got a guarder clear, Shredders Concave Spacer, and a prometheus tightbore. The only other upgrades I've done are installing a mosfet (for rof control), 11.1v lipo (for trigger response), and a bearing spring guide. None of those effect accuracy though. As for the battery, 7.2v lipos are a great option. Modding the gas tube though is pretty simple though. just have to expand the cutout on the bottom of the gas tube by a few millimeters and you'll get batteries in much easier. Scope - hardly necessary unless your vision requires it. Last edited by Kid; March 14th, 2011 at 00:00..