Airsoft Canada - View Single Post

Sarge127 · May 4th, 2014, 11:29

Yeeaahhh this was like my 2nd time shimming on my king arms the first method i used was from ATSKilo23s? guide starting from the spur gear and moving onto the yada yada. So i wasn't impressed no matter how many times i attempted to make it a little quiet so i looked for other methods and found the "Pinion to Bevel" Method without cutting or drilling into my new KA.

I don't knoooowww i made a short vid to demonstrate my first results I'll let you guys decide if its good or bad because im not 70% sure on how its supposed to sound.

https://www.youtube.com/watch?v=GuER9RulBcM

If you got any tips I'd appreciate it.

May 4th, 2014, 11:29	#1
Sarge127 Trader rating Join Date: Jan 2011 Location: Little Grand Rapids, MB	My King Arms Shim Test. Yeeaahhh this was like my 2nd time shimming on my king arms the first method i used was from ATSKilo23s? guide starting from the spur gear and moving onto the yada yada. So i wasn't impressed no matter how many times i attempted to make it a little quiet so i looked for other methods and found the "Pinion to Bevel" Method without cutting or drilling into my new KA. I don't knoooowww i made a short vid to demonstrate my first results I'll let you guys decide if its good or bad because im not 70% sure on how its supposed to sound. https://www.youtube.com/watch?v=GuER9RulBcM If you got any tips I'd appreciate it. __________________ To secure peace, is to prepare for war.