View Single Post
Old May 12th, 2009, 23:53   #3
formerly Sepulcrum
AngelusNex's Avatar
Join Date: May 2007
Location: Kingston,ON, aka Funkasia
Send a message via MSN to AngelusNex
Originally Posted by illusive6296 View Post
So my last post I asked about rewiring my mechbox from front to the back so I could use a crane stock. A new rear switch assembly seem to be the way to go.

Now from looking through tutorials online from various forums, it seems a lot of people had to modify their receivers and/or their stock pipe to facilitate the wires. However, I've seen crane stocks on retailers site, that come with the stock pipe and notched circular plate that I'm guessing holds the pipe to your box. Is this plate notch so you could slip the wiring through the stock pipe? If so has anyone installed a crane stock in this manner? thanks
Get a crane stock with the tube. You SHOULD not need to modify anything. if you do it won't be much, you can always PM me if you need help with this modification and I'll walk you through it.

Originally Posted by notom66866 View Post
Talk to Huang or ILLusion. Huang sold me a buffer tube thats LIPO ready. Pretty sure its what you need.
He mentioned nothing of Lipos.
AngelusNex is offline   Reply With Quote