Originally Posted by ILLusion
The actual area that needs to be protected is less than 1cm in diameter.
The actual LENS of the camera is only 2mm in diameter... MAX.
There is already a lens protector installed in front of it, although it might actually be a UV filter.
You can build the protectors up to 28mm in diameter, and it can mount to the external barrel that houses the optics, but you'd also need to figure out a way to mount it...
I've got a special type of aluminum super adhesive tape that has worked really well for everything so far. Hrrm if it's 28 mm the protectors will be a little bit more expensive, but I still will be able to make a small run of them.