Originally Posted by WolvesSoulZ
Hmm so, what would be good for an Cm028s?
I know that they use V3 gearbox, so i were wondering, what setting would be good for a total remake of gearbox.
Would putting in all systema part would be good?
Also, if it would be to be near 360-400fps, with 20bb+/sec, but still not too fast, too fast rof is unrealistic. What would be good? I know that it would need 9.6v batterie, and a reinforced gearbox, and for the motor, is the systema one good?
And now for a barel, again, is the systema tightbore good?
Edit: Also, if it were to be 400fps, what would be the fps with .23 or .25g bb's?
I upgraded my TM AK-47 mechbox (V3) with the following to produce good accuracy, god ROF, and 407fps with .20 and I think it was 370 with .25.
-madbull tightbore 6.03 inner barrel
-systema cylinder head
-modify air nozzle
-modify V3 bearing piston head
-modify V3 spring guide
-PPA 110 upgrade spring (really good spring)
-Guarder hop up rubber
-Guarder bucking rubber
-Deep fire shims
-Deep fire bearings
-king Arms gear sector clip
All powered by 9.6v batt