Airsoft Canada - View Single Post - Hi-Capa 5.1 - *BLINGTASTIC CHROME* SV Infinity SHPD Signature 2-Tone

ILLusion · August 5th, 2008, 04:21

Built this with some spare parts I had lying around and put it on a brand new Marui Hi-Capa 5.1.

This one's pretty much all show, no go - I mostly only worked the majority of the outside and left the inside almost bone stock. The only upgrade internally is the Airsoft Surgeon Lightweight Blow Back Unit for light weight performance and a Shooters Design POM Cylinder kit for durability.
It's not a complete build for one of my typical all-out screamers, just something basic as a great starter base for a pretty gun to catch some stares.

Externals
Gun: Tokyo Marui Hi-Capa 5.1
Magazine: Tokyo Marui 28 Rounds for Marui Hi-Capa Stainless
Receiver: Freedom Art Long Railed Frame, Silver
Slide: Shooters Design SHPD Signature, 2-Tone
Barrel: Shooters Design Taper
Chamber: Shooters Design Nowlin 45ACP
Everything Else: Stock

Internals
Blow Back Unit: Airsoft Surgeon Lightweight
Nozzle: Shooters Design POM
Valve Blocker: Shooters Design POM
Everything Else: Stock

Performance-wise, this gun has a lot of potential, but other than the blowback unit and Shooters Design POM Cylinder kit, it's all stock and chronies @ 280fps on propane shooting 0.20g BBs.

The light weight blowback unit was chosen to minimize slide weight and to allow a relatively light performance using stock springs and stock flow valves.

Want to see larger sized photos? View here: http://www.pbase.com/illusive_airsof...infinitychrome

August 5th, 2008, 04:21	#1
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	*Hi-Capa 5.1 - BLINGTASTIC CHROME* SV Infinity SHPD Signature 2-Tone Built this with some spare parts I had lying around and put it on a brand new Marui Hi-Capa 5.1. This one's pretty much all show, no go - I mostly only worked the majority of the outside and left the inside almost bone stock. The only upgrade internally is the Airsoft Surgeon Lightweight Blow Back Unit for light weight performance and a Shooters Design POM Cylinder kit for durability. It's not a complete build for one of my typical all-out screamers, just something basic as a great starter base for a pretty gun to catch some stares. Externals Gun: Tokyo Marui Hi-Capa 5.1 Magazine: Tokyo Marui 28 Rounds for Marui Hi-Capa Stainless Receiver: Freedom Art Long Railed Frame, Silver Slide: Shooters Design SHPD Signature, 2-Tone Barrel: Shooters Design Taper Chamber: Shooters Design Nowlin 45ACP Everything Else: Stock Internals Blow Back Unit: Airsoft Surgeon Lightweight Nozzle: Shooters Design POM Valve Blocker: Shooters Design POM Everything Else: Stock Performance-wise, this gun has a lot of potential, but other than the blowback unit and Shooters Design POM Cylinder kit, it's all stock and chronies @ 280fps on propane shooting 0.20g BBs. The light weight blowback unit was chosen to minimize slide weight and to allow a relatively light performance using stock springs and stock flow valves. Want to see larger sized photos? View here: http://www.pbase.com/illusive_airsof...infinitychrome __________________ Advanced Airsoft Armaments and Enhancements** Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed Last edited by ILLusion; August 14th, 2008 at 03:04..