Thread: GBB not working
View Single Post
Old September 24th, 2013, 20:51   #6
Join Date: Apr 2012
Location: Port Elgin, Ontario --&-- London, Ontario
usually no.. but on one of my guns i changed the firing pin. The new one sticks out farther than the stock firing pin and gets caught on the gas valve.. this means that when the hammer goes back it cant pull the firing pin back because its stuck on that valve.

However, if you cock the hammer or rack the slide without the magazine there is no valve in the way and the firing pin will get pulled back with the hammer and ur following shots will be fine.

If this is a brand new gun it should absolutely not be happening.
apilar is offline   Reply With Quote