View Single Post
Old April 2nd, 2011, 14:42   #14
DoctorBadVibez's Avatar
Join Date: Jul 2010
Location: Scarborough, Unionville, Stouffville and on a Benetti
Lots of good advice here, also, you can drill a small hole using a 2.5m bit in the battery side of the deans connector's poles so you can thread your wire through, then flow solder on it, minimum hassle.
"This is my rifle. There are many like it, but this one is mine..." - Maj. Gen. W.H. Rupertus, USMC
DoctorBadVibez is offline   Reply With Quote