View Single Post
Old June 23rd, 2010, 23:17   #7
teriases
 
teriases's Avatar
 
Join Date: Apr 2010
Location: Missisauga, Ontario
Quote:
Originally Posted by ScooterVauto View Post
Depending on the Charger, in my case a Passport ultra, it has 2 styles of connector from the factory, but you can buy 8 ot 10 different ones taht simply plug into the 2 pole Molex plug..
I had to buy a adapter with a blue EC3 end on it, too bad sold out So i had to options to make one. either get a female molex, female ec3 some wire and get hot soldering OR
banana plugs and blue EC3 connector. I built the Banana version.. these 2 links show the two options i had..
http://www.greathobbies.com/producti...rod_id=DYM5001
and the option i chose
http://www.greathobbies.com/producti...rod_id=DYM5007

Good luck.
I'm doing something close to the banana plugs... I am using the alligator clips :P I know its kinda dangerous, but as long as the ends are touching properly and I am not touching the metal connecting parts.... It should be safe?....



So far nothing is burning.... *touch wood*

Last edited by teriases; June 23rd, 2010 at 23:23..
teriases is offline   Reply With Quote