View Single Post
Old January 30th, 2010, 20:27   #2
Darklen's Avatar
Join Date: Jan 2004
Location: Red Deer, AB
Send a message via MSN to Darklen
Good luck getting receipts.

If the gears and bushings/bearing are installed and shimmed properly, there shouldn't be any shavings inside the box, period. Something was not shimmed right and was rubbing somewhere. Degrease the gears and inspect them for damage and wear. Do the same for the bushings/bearings and the mechbox shell as well.

Mofset switch in and of itself won't reduce your rate of fire. A Triggermaster mofset switch has the capability to slow down the motor via it's programing sequence. A smaller voltage battery, like a 9.6v or 8.4v, will reduce your rate of fire though.

SystemA gears are usually black/very dark grey in color and are very nicely finished. No casting marks and very fine machining marks.
ASC & RAAT Age Verifier for Central Alberta

Authorized G&G Dealer.

Last edited by Darklen; January 30th, 2010 at 20:33..
Darklen is offline   Reply With Quote