View Single Post
Old June 29th, 2009, 14:28   #14
Amos's Avatar
Join Date: Aug 2006
Location: Tokushima, Japan
Send a message via MSN to Amos
Originally Posted by Rikiki17 View Post
So do you think it will be the aftermath kraken with 370fps or another crappy gun?
FPS on TM compatible airsoft guns means nothing, lets just hope you get an aftermath gun that's compatible with TM parts, because Aftermath is using old Cyma gearboxes, there are a couple small fitment issues if you're going to be putting high-end parts into the gun.

The gun's range an accuracy comes from the tightness of the air seal, the hop-up chamber and rubber, and the consistency of the inner barrel. I've seen well tuned 250 FPS guns out preform china-clone 400 FPS guns.

Alot of high end aftermarket cylinder heads will not work because the Cyma gearbox has an extra bit of reinforcement in the front of the mechbox that the TM one doesn't have, so the cylinder head has more material than there is room for inside the Cyma box.

If you do get the aftermath one, I'd recommend sending it off to a gun tech to get cleaned, properly greased and get the gears shimmed correctly.

If you do get something you didn't pay for, give Cabelas a call, I'm sure they have some sort of Customer Support. (I find it's easier to call them and speak with some one instead of relaying Emails back and forth.)

Hope this has been helpful, if you've got any more questions, feel free to ask
Custom Builds:

Last edited by Amos; June 29th, 2009 at 14:43..
Amos is offline