Thread: Help with guns
View Single Post
Old June 8th, 2009, 19:36   #65
SHÖCK
aka SNK or Shaniqua
 
SHÖCK's Avatar
 
Join Date: May 2008
Location: Calgary, AB
Quote:
Originally Posted by Sawstink View Post
Ok, thanks. And I am researching myself, and this is on the noob section, so I really don't see that I am doing anything wrong. And technically, asking this is me doing research. And thank youf or being helpful.

http://buyairsoft.ca/catalog/product...roducts_id=425

JG M4A1 for $300, halfbreed. I was hoping for a s-system, but could rails be put on this gun to make it an s-system, or would it just be more with my while to get a G&G M4 which is already to my liking.
Don't buy that, it has the old JG crappy internals. Not worth it. But any TM compatible design means in theory you can use any airsoft accessories or rails you buy separately later.

Quote:
I HAVE SO MANY QUESTIONS :P Sorry.

G&G M16 RIS VS. G&G M4 CQB.
How much would the M16 out range the M4 by OTB?
Would the M4 be able to be upgraded to perform like the M16, and could the M16 be upgraded to perform like an M4?
I have decided on G&G. Good OTB, easy to get.

These will probably be the last questions regarding the purchase of my gun on this thread. Thank you for your patience and answers.
The M16 would not outrange the M4 by much (or even anything at all). Maybe a few feet. There is tangibly no difference aside from comestic appearance. Both have the same gearbox, both have the same hop-up. The slightly longer M16 barrel might give you a slight FPS/accuracy boost and more stable flight but that translates to nothing more than a few feet. Again, any TM compatible design means you can swap and upgrade everything to your hearts content and it will work in theory.
__________________
SHÖCK

Last edited by SHÖCK; June 8th, 2009 at 19:40..
SHÖCK is offline   Reply With Quote