Airsoft Canada
https://niagaraquartermaster.com/

Go Back   Airsoft Canada > Search Forums
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Showing results 1 to 50 of 134
Search took 0.24 seconds.
Search: Posts Made By: ybrik
Forum: Doctor's Corner August 13th, 2013, 23:49
Replies: 3
Views: 2,224
Posted By ybrik
This is true. That screw is long enough that when...

This is true. That screw is long enough that when tightened, it contacts the nozzle which will disable it or limit from moving. That will certainly give feeding issue and loose some fps. I had to...
Forum: Doctor's Corner August 13th, 2013, 23:34
Replies: 9
Views: 3,513
Posted By ybrik
I read on some forums that the issue is the...

I read on some forums that the issue is the bucking. As the stock VFC hop-up mechanism has smaller diameter, so the stock bucking is much preferred.

Thinking of the above, if the issue is several...
Forum: Doctor's Corner August 13th, 2013, 21:34
Replies: 9
Views: 3,513
Posted By ybrik
Same here, upgraded a friend's SCAR-H. He has...

Same here, upgraded a friend's SCAR-H. He has put a guarder clear rubber. Mag is VFC scar-H bnew, and when firing, I'm getting like 4 ~ 5 BBs in one shot. What could have caused this?
Forum: Doctor's Corner July 10th, 2013, 00:02
Replies: 5
Views: 1,500
Posted By ybrik
what is 18:1 ratio? I just googled g&p sector...

what is 18:1 ratio?
I just googled g&p sector gear for stock v2 mechboxes and the number of teeth doesn't match with this VFC one.
Forum: Doctor's Corner July 9th, 2013, 23:19
Replies: 5
Views: 1,500
Posted By ybrik
VFC SCAR-H sector gear (V2)

-Is there a replacement sector gear for this? I just don't like the self-adjusting shim of this stock gear (has spring). It has 16 teeth (piston body side) and 32 teeth (spur gear side).

The...
Forum: Doctor's Corner June 24th, 2013, 23:52
Replies: 16
Views: 2,363
Posted By ybrik
I have fully disassembled it and saw the 2...

I have fully disassembled it and saw the 2 springs for the windage and elevation adjustments. Nothing more I could do to center the recticles, but it looks centered anyways.
The only workaround is...
Forum: Doctor's Corner June 6th, 2013, 15:08
Replies: 7
Views: 2,061
Posted By ybrik
I was thinking about doing that this morning but...

I was thinking about doing that this morning but it would not make any sense. As right now with the stock spring and systema spring guide, I'm having no issues. That means the piston clears the...
Forum: Doctor's Corner June 6th, 2013, 14:46
Replies: 7
Views: 2,061
Posted By ybrik
Here's the spring comparison pic: Black one is...

Here's the spring comparison pic:
Black one is Guarder SP130 vs stock RS-TYPE 56-1 spring (what's the rating of this btw?)
http://i6.photobucket.com/albums/y214/ybrik_5/spring_zps087a9e03.jpg...
Forum: Doctor's Corner June 6th, 2013, 10:37
Replies: 7
Views: 2,061
Posted By ybrik
I tried to put a BU cylinder kit and mechbox...

I tried to put a BU cylinder kit and mechbox won't close in front. But the holes of the BU cylinder head matches. It just won't accept it.
I'm currently using systema spring guide with bearing.
...
Forum: Doctor's Corner June 6th, 2013, 09:01
Replies: 7
Views: 2,061
Posted By ybrik
In my case spring guide with bearing is not the...

In my case spring guide with bearing is not the issue. I'm using systema. It's hard to buy upgrade parts with no guarantee it would fit. With this type of gearbox, it won't close with a different...
Forum: Doctor's Corner June 6th, 2013, 01:28
Replies: 7
Views: 2,061
Posted By ybrik
Real Sword type 56-1 on Guarder SP-130

I had a long night doing troubleshooting. 3 weeks ago, I changed out the stock spring to SP-130 and did shimmings and put 7mm oiless metal bushings.

After test firing today, no response from the...
Forum: Doctor's Corner May 30th, 2013, 00:09
Replies: 16
Views: 2,363
Posted By ybrik
Will do as advised. I should have not...

Will do as advised.
I should have not compared this magnified scope with an RDS where the dot is easily adjusted with reference to the front sight.
Forum: Doctor's Corner May 29th, 2013, 22:29
Replies: 16
Views: 2,363
Posted By ybrik
http://i6.photobucket.com/albums/y214/ybrik_5/DSC_...

http://i6.photobucket.com/albums/y214/ybrik_5/DSC_8673_zpsa8c3ef4b.jpg (http://s6.photobucket.com/user/ybrik_5/media/DSC_8673_zpsa8c3ef4b.jpg.html)
-Got this 5 years ago used.
...
Forum: Doctor's Corner May 29th, 2013, 16:39
Replies: 16
Views: 2,363
Posted By ybrik
I don't see a spring inside when I unscrew both...

I don't see a spring inside when I unscrew both the windage and elevation adjustments. Will post pics when I get home.
Forum: Doctor's Corner May 29th, 2013, 12:54
Replies: 16
Views: 2,363
Posted By ybrik
I will post pics of this one tonight.

I will post pics of this one tonight.
Forum: Doctor's Corner May 29th, 2013, 12:38
Replies: 16
Views: 2,363
Posted By ybrik
Yup. It came to a point I fully loosened and...

Yup. It came to a point I fully loosened and tightened the adjustment screws for both and nothing happened.
Forum: Doctor's Corner May 29th, 2013, 12:30
Replies: 16
Views: 2,363
Posted By ybrik
But the nub is not even connected in a way or in...

But the nub is not even connected in a way or in the lens that it could have adjusted the recticle.
Forum: Doctor's Corner May 29th, 2013, 11:52
Replies: 16
Views: 2,363
Posted By ybrik
G&P ACOG 4x32 recticle adjustment

Tried to adjust the crosshairs but it wouldn't move. This is the non- illuminated type. I even opened the horizontal and vertical knobs and did not find anything special as to how it will do the...
Forum: Upgrades & Modifications April 22nd, 2013, 00:41
Replies: 34
Views: 14,426
Posted By ybrik
Plan to put an sp130 and spring guide with...

Plan to put an sp130 and spring guide with bearing on my type 56-1 for plinking.

All else being stock internals, would it able to handle the sp130?
Forum: Doctor's Corner April 3rd, 2013, 13:47
Replies: 3
Views: 1,509
Posted By ybrik
Found a much realistic fix. On the top half oh...

Found a much realistic fix. On the top half oh the RIS, there is a channel with small metal rods on both sides. These rods catches the teeth of the barrel nut. But it's not thick enough that it makes...
Forum: Doctor's Corner March 31st, 2013, 15:19
Replies: 2
Views: 1,290
Posted By ybrik
Are these modify as hard as guarders?

Are these modify as hard as guarders?
Forum: Doctor's Corner March 31st, 2013, 02:22
Replies: 2
Views: 1,290
Posted By ybrik
Modify v2/v3 arl

Had installed one of these today on a g&p m4 since the stock ARL is gouged when I opened it.

The modify ARL looks good as it has that E-clip that locks the ARL spring preventing it from missing...
Forum: Doctor's Corner March 30th, 2013, 15:38
Replies: 3
Views: 1,509
Posted By ybrik
Delta ring is tight. The other types of RIS is...

Delta ring is tight. The other types of RIS is secured in the delta ring (usually with a bracket passing over the gas tube. This mk18 is secured on the handguard cap.
Forum: Doctor's Corner March 30th, 2013, 15:07
Replies: 3
Views: 1,509
Posted By ybrik
g&p mk18 mod 0 RIS

Anyone have this aeg here, just want to ask if your RIS has a bit rotational play? The lock of this ris is on the handguard cap. The handguard cap is only secured by 2 holes, one for the outer...
Forum: Doctor's Corner June 25th, 2012, 11:39
Replies: 7
Views: 2,853
Posted By ybrik
I think they manufactured it like the KAC RIS. ...

I think they manufactured it like the KAC RIS. On the lower half of this thread:
http://jobrelatedstuff.com/mobile/topic.html?b=3&f=118&t=408319&page=123

I think RIS would be really wobble-prone...
Forum: Doctor's Corner June 25th, 2012, 01:03
Replies: 7
Views: 2,853
Posted By ybrik
RIS play

Have a g&p mk18 mod0 and I noticed that the RIS with the tactical foregrip installed has a bit of a rotary play. It's not rock-solid as my other m4 with a RAS.

Here is what I found...

RIS is...
Forum: Doctor's Corner November 8th, 2011, 23:20
Replies: 6
Views: 2,828
Posted By ybrik
check if ARL spring is good, if not the ARL does...

check if ARL spring is good, if not the ARL does not contact properly with the bevel gear.
Forum: Doctor's Corner September 6th, 2011, 23:00
Replies: 4
Views: 2,406
Posted By ybrik
Follow this guide, on page 08: ...

Follow this guide, on page 08:
http://alakdan.net/m14-8.html

I have used this guide when I upgraded my TM M-14. Save the link if you can. It has been posted several years ago and I just had...
Forum: Doctor's Corner September 6th, 2011, 22:51
Replies: 2
Views: 1,599
Posted By ybrik
When the gun fails to fire, are you in semi? ...

When the gun fails to fire, are you in semi? Have you tried switching to auto and fire again?
Forum: General June 26th, 2011, 12:06
Replies: 20
Views: 7,118
Posted By ybrik
Sentry, as I could remember, you guys returned...

Sentry, as I could remember, you guys returned fire like only 5 times. Lol!
great demo btw.

Is the cf-18 providing air support with the ch-146 in today's demo?
Forum: General June 25th, 2011, 23:59
Replies: 20
Views: 7,118
Posted By ybrik
Members of 31 Canadian Brigade Group including...

Members of 31 Canadian Brigade Group including infantry and rolling armour. With support from LAV mounted 25mm gun and CH-146 Griffons (not shown), this exciting combined assault by armour infantry...
Forum: General June 25th, 2011, 22:58
Replies: 20
Views: 7,118
Posted By ybrik
Canadian Forces Combined Arms Demo - St. Thomas Airshow 2011

CF demonstration of combined ground and air assault on a fixed 'enemy' position.

Will post pics later.

Anyone who was here today?
http://www.greatlakesinternationalairshow.ca/
Forum: Doctor's Corner June 9th, 2011, 10:48
Replies: 5
Views: 2,023
Posted By ybrik
or just buy any other motorplate if compatible...

or just buy any other motorplate if compatible with tm grip.
Forum: Doctor's Corner March 11th, 2011, 01:14
Replies: 4
Views: 3,669
Posted By ybrik
Just buy a spring about an inch long and insert...

Just buy a spring about an inch long and insert it in the inner barrel till it reaches the hop-up. That's the way it is on an m-14 hop-up. I never knew this is possible, I saw some vid on youtube.
Forum: Doctor's Corner February 18th, 2011, 07:28
Replies: 11
Views: 3,772
Posted By ybrik
They are all correct, your mechbox needs a major...

They are all correct, your mechbox needs a major overhaul/tune-up.
Forum: Doctor's Corner February 15th, 2011, 22:21
Replies: 11
Views: 8,977
Posted By ybrik
I have upgraded 3 aegs (2 m4s and m14). I...

I have upgraded 3 aegs (2 m4s and m14). I noticed a significant drop in FPS. I am confident that my compression system has no airleaks. I opened up all three and the culprit was too much friction...
Forum: Airsoft Guns Discussion January 28th, 2011, 03:50
Replies: 7
Views: 2,222
Posted By ybrik
You should be able to remove the hex screw, the...

You should be able to remove the hex screw, the trick is moving the strap bracket in a good position wherein you could untighten and tighten the screw. I did in on mine.
Forum: Doctor's Corner January 2nd, 2011, 01:35
Replies: 15
Views: 3,668
Posted By ybrik
This is how the mechbox looks after shaving and...

This is how the mechbox looks after shaving and it now fits perfectly on the metal body.
I believe that this part being lessened is not critical to the mechbox's durability/performance....
Forum: Doctor's Corner December 31st, 2010, 19:18
Replies: 4
Views: 1,522
Posted By ybrik
did it work before on that battery?

did it work before on that battery?
Forum: Doctor's Corner December 27th, 2010, 10:24
Replies: 30
Views: 21,535
Posted By ybrik
sebdark, if the above recommendations doesn`t...

sebdark, if the above recommendations doesn`t work for you, inspect your magazine feed tube and the hop-up bb feed tube. Are they aligned and the mag spring engages/released a bb when fully-seated?...
Forum: Doctor's Corner December 25th, 2010, 22:04
Replies: 30
Views: 21,535
Posted By ybrik
Get a systema hop-mech.

Get a systema hop-mech.
Forum: Doctor's Corner December 25th, 2010, 12:24
Replies: 15
Views: 3,668
Posted By ybrik
...and finally, issue resolved. Thanks for all...

...and finally, issue resolved. Thanks for all your help guys.... Merry Christmas ASC!
Will post pics later how the mechbox looks then...
Forum: Doctor's Corner December 25th, 2010, 03:07
Replies: 15
Views: 3,668
Posted By ybrik
I had removed the switch plate and tried to fit...

I had removed the switch plate and tried to fit again and same results. The cut-off lever is good and not protruding outside the gearbox. I'll shave again some area on the mechbox now that the...
Forum: Doctor's Corner December 24th, 2010, 12:27
Replies: 15
Views: 3,668
Posted By ybrik
I'll try to disassemble the mechbox and remove...

I'll try to disassemble the mechbox and remove the selector plate...close the mechbox and install in the metal body. I think this could be an issue, selector plate prevents the mechbox to fully seat...
Forum: Doctor's Corner December 23rd, 2010, 19:54
Replies: 15
Views: 3,668
Posted By ybrik
Well, I think me and audi_bhoy were unlucky ones...

Well, I think me and audi_bhoy were unlucky ones in having fitting issues.
Good to know that Amos had done a number of these combo and never had an issue.
Forum: Doctor's Corner December 22nd, 2010, 21:54
Replies: 15
Views: 3,668
Posted By ybrik
Did you only have to shave the gearbox?

Did you only have to shave the gearbox?
Forum: Doctor's Corner December 22nd, 2010, 17:04
Replies: 15
Views: 3,668
Posted By ybrik
Yup, that's what I did. I never thought that I...

Yup, that's what I did. I never thought that I would be having these issues. If I knew it beforehand, I wouldn't have gamble, but I'm already on it...
The pin is a bit offset upwards when half-way...
Forum: Doctor's Corner December 22nd, 2010, 16:45
Replies: 15
Views: 3,668
Posted By ybrik
Systema mechbox to g&p metal body

After upgrading the mechbox, I never thought I would have problems fitting it into a g&p metal body.

First, I have to shave the rear part of the lower receiver where there is a rubber padding so...
Forum: Doctor's Corner October 11th, 2010, 17:15
Replies: 4
Views: 1,998
Posted By ybrik
Actually it's much easier to tighten it with an...

Actually it's much easier to tighten it with an armorer's wrench for CA's case. I think there's not gas tube on it. So just removing the ras would give you access to the barrel nut and tighten. ...
Forum: Doctor's Corner October 3rd, 2010, 09:50
Replies: 9
Views: 4,666
Posted By ybrik
Chingyul, It's not the shims, you need to...

Chingyul,

It's not the shims, you need to tighten it up more. If it's difficult for you, get a barrel nut wrench. If it's difficult, use a longer wrench (either use a real m-16 armorer's wrench...
Showing results 1 to 50 of 134

 
Airsoft Canada
https://niagaraquartermaster.com/

All times are GMT -4. The time now is 07:37.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.