Airsoft Canada
AirsoftParts.ca

Go Back   Airsoft Canada > Search Forums
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Showing results 1 to 50 of 96
Search took 0.01 seconds.
Search: Posts Made By: SultanOfShwing
Forum: Gear Discussion April 27th, 2012, 21:08
Replies: 20
Views: 4,162
Posted By SultanOfShwing
I would stay away from 5.11 boots. They like to...

I would stay away from 5.11 boots. They like to fall apart after two weeks.
Forum: Doctor's Corner March 29th, 2012, 20:43
Replies: 8
Views: 2,379
Posted By SultanOfShwing
For me it took securing the upper using the...

For me it took securing the upper using the barrel in a vice. Then 1 person holding the barrel steady while another person torqued the nut using pliers and two hands. Barrel got a little mangled...
Forum: Reviews March 1st, 2012, 18:18
Replies: 31
Views: 15,495
Posted By SultanOfShwing
I bought an SRC GEN III M16 two years ago and has...

I bought an SRC GEN III M16 two years ago and has never let me down. The stock externals were nice except for the tinted lower that cracked on game 1. Mechanically though it has been brilliant.

I...
Forum: Upgrades & Modifications February 15th, 2012, 06:58
Replies: 0
Views: 1,141
Posted By SultanOfShwing
Where to find GBB Feed Spring

I have a WE 1911 MEU magazine that needs a new feed spring. My local airsoft shops don't carry them and I want to avoid shipping for such a small item. Anyone know where I could find a suitable...
Forum: Upgrades & Modifications November 24th, 2011, 05:21
Replies: 0
Views: 2,698
Posted By SultanOfShwing
King Arms Colt M4A1

I just bought one from Torontoairsoft to use as a base for a MK12 DMR build. The stock fps is rated at about 450, but the retailer recommends downgrading the spring for increased durability. Does...
Forum: Accessories Discussion November 5th, 2011, 05:21
Replies: 2
Views: 1,579
Posted By SultanOfShwing
Flashlight replacement lenses

Can replacement lenses be found at local stores like Canadian tire? Or are online shops the way to go? Any recommendations?
Forum: Airsoft Guns Discussion October 15th, 2011, 15:03
Replies: 8
Views: 5,797
Posted By SultanOfShwing
In my experience, SRC receivers are very brittle....

In my experience, SRC receivers are very brittle. I had a tinted lower crack at the front pin hole after one.game
Forum: Airsoft Guns Discussion October 15th, 2011, 05:22
Replies: 8
Views: 5,797
Posted By SultanOfShwing
Ive found that mix matching receiver brands does...

Ive found that mix matching receiver brands does not work. The parts just have to be off by less than a mm to not fit correctly
Forum: Accessories Discussion October 8th, 2010, 05:55
Replies: 0
Views: 2,666
Posted By SultanOfShwing
M4 Buffer tube screw

I need to find a screw that secures the buffer tube onto the lower receiver for an M4. Anyone know if/where I can find this screw on its own?

I wonder if I could just go to a hardware store and...
Forum: Airsoft Guns Discussion June 24th, 2010, 19:31
Replies: 12
Views: 4,817
Posted By SultanOfShwing
Ah, I thought they were metal. How are the...

Ah, I thought they were metal. How are the internals for the TM Famas? I've heard that the Cybergun is arguably a better gun than the TM. I don't know much about either but I find that hard to...
Forum: Airsoft Guns Discussion June 24th, 2010, 19:06
Replies: 12
Views: 4,817
Posted By SultanOfShwing
Tokyo Marui or Foreign Legion FA-MAS?

I'm thinking about picking up a FA-MAS. The only ones I know about are old Tokyo Marui and the Foreign Legion/Cybergun version. Which one is the better buy or is there a better version made by...
Forum: Airsoft Guns Discussion June 24th, 2010, 05:00
Replies: 33
Views: 16,819
Posted By SultanOfShwing
I must be crazy because I actually really like...

I must be crazy because I actually really like the look of this gun. The fact that the stock can be swapped out must be the reason why (my taste in appearance constantly changes). Does anyone know if...
Forum: Upgrades & Modifications May 29th, 2010, 21:52
Replies: 13
G&P
Views: 5,524
Posted By SultanOfShwing
Now that the brand has been established, does...

Now that the brand has been established, does anyone know how I get this thing onto a mechbox?

For curiosities sake, how much is a Guarder metal body worth?
Forum: Upgrades & Modifications May 29th, 2010, 20:13
Replies: 13
G&P
Views: 5,524
Posted By SultanOfShwing
I was finally able to get some photos up so you...

I was finally able to get some photos up so you guys can see the body. I also just recently received a G&P metal body accessories kit because the body I have is bare. Lo and behold but some or all of...
Forum: Upgrades & Modifications April 27th, 2010, 18:44
Replies: 13
G&P
Views: 5,524
Posted By SultanOfShwing
I was actually mistaken about the engravings. I'm...

I was actually mistaken about the engravings. I'm thinking I just got bamboozled and was sold a knock-off. Hopefully I can grind off the tabs so I don't have a $350 paper weight.
Forum: Upgrades & Modifications April 27th, 2010, 07:34
Replies: 13
G&P
Views: 5,524
Posted By SultanOfShwing
The lower receiver has G&P engravings. but I...

The lower receiver has G&P engravings. but I don't know if any knock-offs exist. I'll post pictures later today.
Forum: Upgrades & Modifications April 26th, 2010, 22:55
Replies: 13
G&P
Views: 5,524
Posted By SultanOfShwing
G&P

My G&P M4 metal upper receiver as the rear tabs for the rear body pins to go into. Will these need to be removed to get it to fit over the mechbox? So far I haven't been able to get the upper...
Forum: Doctor's Corner March 19th, 2010, 21:16
Replies: 20
Views: 4,284
Posted By SultanOfShwing
I'm using a G&P Sniper grip. It's the one that...

I'm using a G&P Sniper grip. It's the one that looks like a PSG-1 grip. I actually considered it being the grip so I'm going to quickly try using my stock TM grip and see if that helps. That would...
Forum: Doctor's Corner March 19th, 2010, 03:10
Replies: 20
Views: 4,284
Posted By SultanOfShwing
Okay so I opened up my mechbox and checked the...

Okay so I opened up my mechbox and checked the shimming and resistance on the gears. Everything appears to be fine. I swapped out the M120 spring for a M100 spring. After re-assembling everything I...
Forum: Doctor's Corner March 16th, 2010, 08:31
Replies: 20
Views: 4,284
Posted By SultanOfShwing
I've tried a 8.4v 1800mah, 9.6v 1600mah, and a...

I've tried a 8.4v 1800mah, 9.6v 1600mah, and a 9.6v 3600mah. I'm about to try reversing the wiring.

Edit: I tried reversing the wiring and it still seems to react the same way. The motor tries to...
Forum: Doctor's Corner March 15th, 2010, 21:18
Replies: 20
Views: 4,284
Posted By SultanOfShwing
I've tried two motors now (a TM EG-1000 and a KA...

I've tried two motors now (a TM EG-1000 and a KA Infinite Torque-up) both motors act the same. I've tried multiple motor heights but I have yet to try reversing the wiring. I'll try that tonight when...
Forum: Upgrades & Modifications March 14th, 2010, 20:15
Replies: 9
Views: 3,483
Posted By SultanOfShwing
Getting a new stock is a last resort though. I've...

Getting a new stock is a last resort though. I've already sunk a ton of money into this project and I'm at the point where I just want it finished as painlessly as possible.
Forum: Upgrades & Modifications March 14th, 2010, 20:03
Replies: 9
Views: 3,483
Posted By SultanOfShwing
I've made some measurements and I've found that...

I've made some measurements and I've found that the only significant piece I need to cut out of my stock is a horizontal cylindrical support that sits perpendicular to the length of the stock (it...
Forum: Upgrades & Modifications March 14th, 2010, 18:39
Replies: 9
Views: 3,483
Posted By SultanOfShwing
9.6v 3600mah large bat in TM M16 stock

Before I start hacking up my stock, can a 9.6v 3600mah large type battery fit inside a TM M16 full stock with some modification?
Forum: Doctor's Corner March 5th, 2010, 16:20
Replies: 20
Views: 4,284
Posted By SultanOfShwing
Gun won't cycle

I have a Systema M120 complete V2 gearbox that has never been opened and a King Arms Torque-up motor using a 9.6v 1500mah battery. The motor works fine on its own but when everything is assembled...
Forum: Airsoft Guns Discussion March 3rd, 2010, 08:13
Replies: 9
Views: 4,411
Posted By SultanOfShwing
This riser requires it to be secured by two...

This riser requires it to be secured by two screws at the front-end of it. The rear is held on using standard rail mounts but I don't think you will be able to secure the front-end on a rail system...
Forum: Upgrades & Modifications February 28th, 2010, 19:55
Replies: 1
Views: 1,607
Posted By SultanOfShwing
Barrel shims

Does anyone know where I can buy the metal shims that go between the delta ring, outer barrel, and upper receiver for Armalites?
Forum: Upgrades & Modifications February 19th, 2010, 05:33
Replies: 10
Views: 5,712
Posted By SultanOfShwing
If you can't get an answer here, it might be a...

If you can't get an answer here, it might be a good idea to ask those questions on an automotive forum.
Forum: General February 9th, 2010, 23:26
Replies: 7
Views: 5,188
Posted By SultanOfShwing
Gorilla style? Like dressing up in gorilla suits...

Gorilla style? Like dressing up in gorilla suits and shooting airsoft guns in front of a camera? Sounds like a good movie.
Forum: Newbie Tank February 9th, 2010, 21:33
Replies: 5
Views: 2,202
Posted By SultanOfShwing
If you want to do it properly the upgrades are...

If you want to do it properly the upgrades are going to cost more then what you paid for the gun already. Are you willing to do that?
Forum: Doctor's Corner February 8th, 2010, 18:18
Replies: 11
Views: 3,773
Posted By SultanOfShwing
Shim the inside of the magwell with tape?

Shim the inside of the magwell with tape?
Forum: Upgrades & Modifications February 2nd, 2010, 12:17
Replies: 20
Views: 4,738
Posted By SultanOfShwing
It's only the 7" length kit so it doesn't work...

It's only the 7" length kit so it doesn't work for my build. If I got the full length one, I certainly would have kept that on instead of the Dboys SPR kit. I'll just keep the JP Rifle kit for a...
Forum: Upgrades & Modifications February 2nd, 2010, 10:07
Replies: 20
Views: 4,738
Posted By SultanOfShwing
The externals will be mostly G&P. But I did cheap...

The externals will be mostly G&P. But I did cheap out on the front-end which is DBoys; however, that is sort of ironic because the front-end I had before was a Madbull JP Rifles front-end that costs...
Forum: Upgrades & Modifications February 1st, 2010, 10:48
Replies: 20
Views: 4,738
Posted By SultanOfShwing
I think I went really overboard with this one ha...

I think I went really overboard with this one ha ha. This maintenance job has become a complete rebuild. The list of parts just kept growing and growing. I'm at over $1200 in parts now. I can't wait...
Forum: Upgrades & Modifications January 24th, 2010, 20:51
Replies: 20
Views: 4,738
Posted By SultanOfShwing
Initially I brought the problem to a gun-doc and...

Initially I brought the problem to a gun-doc and he explained to me what exactly the issue was. He suggested that I do some upgrading while I have everything open. So I checked out some parts and it...
Forum: Upgrades & Modifications January 24th, 2010, 08:45
Replies: 20
Views: 4,738
Posted By SultanOfShwing
I decided to just replace the existing internals...

I decided to just replace the existing internals entirely. New Systema mechbox, motor, Prometheus hop-up. And I turned my AEG into an M16 SPR, so I had to get the conversion kit plus Vietnam style...
Forum: Upgrades & Modifications January 24th, 2010, 08:02
Replies: 20
Views: 4,738
Posted By SultanOfShwing
I've been bitten by the upgrade-bug

And ouch does it hurt.

It amazes me at how something so simple as a cracked mechbox has turned into over $500 worth of upgrades and I still need to buy a metal body once I have access to the...
Forum: Newbie Tank January 15th, 2010, 16:51
Replies: 29
Views: 7,367
Posted By SultanOfShwing
I just woke up and now I have a huge craving for...

I just woke up and now I have a huge craving for a box of KD...the 10 minute wait is going to be painful. Thanks.
Forum: Airsoft Guns Discussion January 15th, 2010, 00:19
Replies: 98
Views: 23,190
Posted By SultanOfShwing
I've read a government document that stated it...

I've read a government document that stated it was 500 FPS OR 5.7 joules. Maybe I misread it or maybe it was out of date and there has been a revision. Can you provide the latest version of the law...
Forum: General January 1st, 2010, 00:40
Replies: 34
Views: 9,945
Posted By SultanOfShwing
Lo and behold this is the response I get: ...

Lo and behold this is the response I get:

Dear Customer,

Thank you for your order with Evike.com.

Your package(s) have been dropped off at the Postal Office on 12/29/09.

USPS Tracking...
Forum: Newbie Tank December 31st, 2009, 10:11
Replies: 9
Views: 2,318
Posted By SultanOfShwing
I use 68 round capacity King Arms magazines. They...

I use 68 round capacity King Arms magazines. They are of metal construction and feed well. You can get a box set of 5 for 67.00 CAD from www.airsoftparts.ca
Forum: General December 31st, 2009, 06:14
Replies: 34
Views: 9,945
Posted By SultanOfShwing
I'll give them until Monday before I open a...

I'll give them until Monday before I open a dispute. I'm giving them a chance because they are selling something I want and I think they are the only retailer of it.
Forum: General December 31st, 2009, 05:01
Replies: 34
Views: 9,945
Posted By SultanOfShwing
I just emailed this to their sales dept.: ...

I just emailed this to their sales dept.:

"Hello,

It has been about three weeks now since you said one of my items was clearing customs and said it would take about week for it to be finally...
Forum: General December 29th, 2009, 02:02
Replies: 34
Views: 9,945
Posted By SultanOfShwing
I paid via PayPal and the last time they...

I paid via PayPal and the last time they contacted me was Dec. 23. I asked them for an update on the ETA for my order and if I will receive a tracking number. They didn't answer my first question and...
Forum: General December 29th, 2009, 01:42
Replies: 34
Views: 9,945
Posted By SultanOfShwing
Advice on dealing with Evike

I placed an order with Evike back in mid-November not realizing how much of a crappy online retailer they are. My order was quite small (2 rail risers and a stock saddle). After the order was paid...
Forum: Airsoft Guns Discussion October 17th, 2009, 14:36
Replies: 3
Views: 2,435
Posted By SultanOfShwing
Hmm, I kind of thought the TSD wouldn't have any...

Hmm, I kind of thought the TSD wouldn't have any room for mods.
Forum: Airsoft Guns Discussion October 17th, 2009, 08:10
Replies: 3
Views: 2,435
Posted By SultanOfShwing
M14 EBR springer sniper idea

So I was watching this video on youtube that showcased a M14 EBR with a suppressor and when it was firing sub-sonic ammunition the rounds needed to be manually cycled.

That got me thinking of the...
Forum: Upgrades & Modifications July 11th, 2009, 07:16
Replies: 11
Views: 4,764
Posted By SultanOfShwing
Will cutting the barrel really cause that much...

Will cutting the barrel really cause that much damage that it will become useless? I don't see how chopping off a few centimeters could do that so long as I keep everything nice and clean.
Forum: Upgrades & Modifications July 10th, 2009, 16:13
Replies: 11
Views: 4,764
Posted By SultanOfShwing
There I've (nearly) finished the installation of...

There I've (nearly) finished the installation of my new Madbull JP front kit. All that's left to do is cut the inner barrel down to size and I'm good.
...
Forum: Upgrades & Modifications July 10th, 2009, 15:25
Replies: 11
Views: 4,764
Posted By SultanOfShwing
OH YEAH!!! I got some help from my little...

OH YEAH!!! I got some help from my little brother. I held the receiver firm with both arms and he torqued the heck out of a it with the vice grips and we got it off. I'll post pictures of my gun once...
Showing results 1 to 50 of 96

 
Airsoft Canada
AirsoftParts.ca

All times are GMT -4. The time now is 18:21.


Powered by vBulletin® Version 3.8.10
Copyright ©2000 - 2018, vBulletin Solutions, Inc.