Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Search Forums
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Showing results 1 to 50 of 500
Search took 2.72 seconds.
Search: Posts Made By: RainyEyes
Forum: Airsoft Guns Discussion November 8th, 2019, 01:00
Replies: 13
Views: 4,961
Posted By RainyEyes
Although it took 6 years props to you for never...

Although it took 6 years props to you for never giving up
Forum: Doctor's Corner November 1st, 2019, 21:25
Replies: 2
Views: 765
Posted By RainyEyes
Buy the o-ring kits from princess auto or crappy...

Buy the o-ring kits from princess auto or crappy tire and save the hassle.

Most magazines use the same orings made by the same. I grabbed a kit and compared it with one of my pistol specific...
Forum: Upgrades & Modifications October 15th, 2019, 19:01
Replies: 4
Views: 753
Posted By RainyEyes
You pretty much have to do trial and error when...

You pretty much have to do trial and error when swapping triggers. Each gearbox is different so a generic one from one brand might not work in another.

Try some aftermarket stuff. SHS or a...
Forum: General October 7th, 2019, 18:18
Replies: 2
Views: 907
Posted By RainyEyes
Here you go: https://www.herooutdoors.com/ ...

Here you go:
https://www.herooutdoors.com/

I think their legal name is hero army surplus but the storefront itself is herooutdoors.

Iirc you want to speak with Cody for paintball/airsoft stuff.
Forum: Doctor's Corner September 22nd, 2019, 18:19
Replies: 6
Views: 632
Posted By RainyEyes
Disassemble and reassemble. Mags should go in and...

Disassemble and reassemble. Mags should go in and out of the gun freely without obstruction. This is for practical and mechanical reasons usually.

Was this problem present before you installed the...
Forum: Accessories Discussion September 22nd, 2019, 00:59
Replies: 2
Views: 1,841
Posted By RainyEyes
There's never been a restriction for flash hiders...

There's never been a restriction for flash hiders iirc. I've imported metal mp5 and m4 flash hiders for the past 6 years without issue.

Only restrictions are suppressors iirc.
Forum: Upgrades & Modifications August 23rd, 2019, 22:49
Replies: 3
Views: 1,307
Posted By RainyEyes
From my experience... in a nuteshell: ...

From my experience... in a nuteshell:

Different brands will have different specs for the same gun.

DO NOT MIX DIFFERENT BRAND PARTS.

For example: G&G Mp5 and Cmya Mp5 although they are the...
Forum: General August 9th, 2019, 22:27
Replies: 80
Views: 9,648
Posted By RainyEyes
Not picking up free slightly used bb's from the...

Not picking up free slightly used bb's from the field? Filthy casual!
Forum: Airsoft Guns Discussion July 31st, 2019, 12:33
Replies: 3
Views: 615
Posted By RainyEyes
They went out of business almost a decade ago...

They went out of business almost a decade ago iirc?
Forum: Doctor's Corner July 30th, 2019, 16:52
Replies: 4
Views: 633
Posted By RainyEyes
Generally speaking it's gonna be a problem with...

Generally speaking it's gonna be a problem with the selector plate or the switch itself.

I had an mp5 do this on me when I swapped a g&g selector plate on a CA one, and did some fiddling around...
Forum: Airsoft Guns Discussion July 24th, 2019, 12:45
Replies: 10
Views: 982
Posted By RainyEyes
You literally posted yesterday less than 24 hours...

You literally posted yesterday less than 24 hours ago. Do you think people don't sleep?
Forum: Doctor's Corner July 23rd, 2019, 16:58
Replies: 19
Views: 2,094
Posted By RainyEyes
I feel like you wrote all that just to call dibs...

I feel like you wrote all that just to call dibs when he quits and wants to get all of his broken stuff.
Forum: Doctor's Corner July 23rd, 2019, 12:43
Replies: 19
Views: 2,094
Posted By RainyEyes
If you think that's impressive you should buy...

If you think that's impressive you should buy APS. Definitely won't break after 1 game! Or an ARES, that breaks on the first trigger pull!
Forum: Doctor's Corner July 23rd, 2019, 01:26
Replies: 19
Views: 2,094
Posted By RainyEyes
It's a toy.

It's a toy.
Forum: Doctor's Corner July 22nd, 2019, 18:16
Replies: 19
Views: 2,094
Posted By RainyEyes
Probably past warranty period... they usually...

Probably past warranty period... they usually only do 2 weeks.

If the fuse is blown replacing it won't solve the problem.

The issue is that there's a part of the gearbox that is preventing the...
Forum: General July 5th, 2019, 17:52
Replies: 80
Views: 9,648
Posted By RainyEyes
Please don't snort the bb's. All plastic odors...

Please don't snort the bb's. All plastic odors are carcinogenic.
Forum: Doctor's Corner June 28th, 2019, 18:30
Replies: 4
Views: 2,065
Posted By RainyEyes
I mean if you messed with a bunch of other parts...

I mean if you messed with a bunch of other parts it could easily be those as well. I'm not saying file it down right away im saying check first and see if that's the root of the problem. If not...
Forum: Doctor's Corner June 28th, 2019, 09:25
Replies: 4
Views: 2,065
Posted By RainyEyes
Probably fitment issues with the slide and frame....

Probably fitment issues with the slide and frame.

Make sure to lube the rails and check for friction. The slide shouldn't wobble but it shouldn't be so tight you feel the slide grinding when...
Forum: Upgrades & Modifications June 5th, 2019, 17:00
Replies: 2
Views: 2,505
Posted By RainyEyes
Generic parts - buy them. Unique...

Generic parts - buy them.

Unique parts/adapters and new concepts are what 3d printing is for.
Forum: Doctor's Corner April 29th, 2019, 22:23
Replies: 8
Views: 4,886
Posted By RainyEyes
If it's not one thing it's another. Your...

If it's not one thing it's another.

Your problem sounds word for word with mine...

Try adding material to the part of the trigger that makes contact with the trolley or replacing the cutoff...
Forum: Doctor's Corner April 29th, 2019, 10:37
Replies: 8
Views: 4,886
Posted By RainyEyes
You can either file the top of the trigger so...

You can either file the top of the trigger so that the trolly can fall back into place with the trigger or the back of the trigger where it meets the gearbox.

If we're looking at my video where...
Forum: Doctor's Corner April 29th, 2019, 07:36
Replies: 8
Views: 4,886
Posted By RainyEyes
Gearbox/trigger is off spec. Disassemble the...

Gearbox/trigger is off spec.

Disassemble the gearbox so only the trigger components and the shuttle are installed. Pull the trigger back so that the shuttle will engage the trigger contacts and...
Forum: General April 11th, 2019, 23:12
Replies: 77
Views: 40,687
Posted By RainyEyes
Red face Their partners are evike. If you can get it...

Their partners are evike. If you can get it cheaper ordering legally from evike to be imported into Canada it's often better than buying off herooutdoors. If you have things that you absolutely must...
Forum: Upgrades & Modifications April 9th, 2019, 00:13
Replies: 4
Views: 1,206
Posted By RainyEyes
Speed doesn't always equal torque and vice versa.

Speed doesn't always equal torque and vice versa.
Forum: Doctor's Corner April 4th, 2019, 14:55
Replies: 3
Views: 1,441
Posted By RainyEyes
A little grinding is normal since the hammer will...

A little grinding is normal since the hammer will slide against the bbu. From the sound of it I think your hammer assembly needs a power washing.
Forum: Doctor's Corner April 2nd, 2019, 17:00
Replies: 7
Views: 2,652
Posted By RainyEyes
It's more likely that the slide is too heavy and...

It's more likely that the slide is too heavy and the recoil spring is too strong. Try swapping it out or use a different slide if you have one. It doesn't matter how good the seal is if it requires...
Forum: Doctor's Corner April 1st, 2019, 10:41
Replies: 7
Views: 2,652
Posted By RainyEyes
It's a common problem with the kjw pistols. ...

It's a common problem with the kjw pistols.

The slide is too heavy and the red nozzles are really bad quality. Try to swap it out with an aftermarket piston if you can. If it's a blue nozzle it...
Forum: Doctor's Corner March 11th, 2019, 17:06
Replies: 4
Views: 3,517
Posted By RainyEyes
If it's used there's a good chance the Sears...

If it's used there's a good chance the Sears inside the hammer we're worn to begin with.

Replace the whole hammer assembly and pray?
Forum: Accessories Discussion March 10th, 2019, 22:09
Replies: 14
Views: 2,292
Posted By RainyEyes
It's been less than 24 hours... How are you doing...

It's been less than 24 hours... How are you doing the fix? JB weld usually requires about 18 hours to cure if you're doing right.

For metal to plastic adhesion you're definitely going to need the...
Forum: Accessories Discussion March 10th, 2019, 19:53
Replies: 14
Views: 2,292
Posted By RainyEyes
I wouldn't recommend gorilla glue just because of...

I wouldn't recommend gorilla glue just because of how much space it needs to expand and create contact... Not to mention it's more of a foam and there's lots of air bubbles that form.

For tight...
Forum: General March 10th, 2019, 13:17
Replies: 3
Views: 1,039
Posted By RainyEyes
You buy/sell gear that is entry-mid level on...

You buy/sell gear that is entry-mid level on Facebook/local ad posts/Reddit.

You see more buy/sell ads for the expensive $500+ stuff on ASC.

Since I have experienced harassment/threats by other...
Forum: Accessories Discussion March 10th, 2019, 00:28
Replies: 14
Views: 2,292
Posted By RainyEyes
Depending on how much gap there is between the...

Depending on how much gap there is between the thread and the newly formed hole you're going to want to fill it with something and retap it.

If the rmr mount is made of plastic, get some jb...
Forum: Gear Discussion March 5th, 2019, 10:42
Replies: 3
Views: 2,752
Posted By RainyEyes
Yes you go to the optometrist or a glasses shop...

Yes you go to the optometrist or a glasses shop and they will fill your prescription and cut the lenses to size.

Just make sure your insurance covers the lenses and shop around for one that...
Forum: Gear Discussion February 21st, 2019, 20:09
Replies: 9
Views: 4,860
Posted By RainyEyes
Softshell jackets for tops. For bottoms...

Softshell jackets for tops.

For bottoms you're going to need to experiment some and let your GF shoot you in the butt and see what pants leave a mark and what don't. Generally any BDU bottoms with...
Forum: ASC News and Announcements February 19th, 2019, 17:35
Replies: 348
Views: 411,830
Posted By RainyEyes
Province: Ontario City/Town:...

Province: Ontario

City/Town: Toronto/Scarborough

ASC Name: Rainyeyes

Real Name: Benny

Services offered:
Repairs on all Jag arms Scattergun/m870 shotguns such as leaks and fps issues,...
Forum: Gear Discussion February 11th, 2019, 23:22
Replies: 10
Views: 3,805
Posted By RainyEyes
*laughs in M249 ammo box hose fed HPA tapped m870...

*laughs in M249 ammo box hose fed HPA tapped m870 shotgun*
Forum: Doctor's Corner January 28th, 2019, 00:53
Replies: 9
Views: 1,807
Posted By RainyEyes
Get a new hop up unit. No point holding onto the...

Get a new hop up unit. No point holding onto the old one that's now useless.
Forum: Doctor's Corner January 27th, 2019, 20:28
Replies: 9
Views: 1,807
Posted By RainyEyes
Looks like a standard m4 hop up but it's just 2...

Looks like a standard m4 hop up but it's just 2 pieces. I imagine they moved away from that design because of alignment issues and fewer moving parts.

Just grab any old m4 unit that looks like the...
Forum: Doctor's Corner January 22nd, 2019, 23:14
Replies: 2
Views: 1,194
Posted By RainyEyes
The unit might be different but the rubbers...

The unit might be different but the rubbers should be universal. Perhaps yours was installed from factory incorrectly. Have you tried to take apart the hop up unit, re-position the nub and realign...
Forum: Upgrades & Modifications January 14th, 2019, 17:06
Replies: 4
Views: 1,019
Posted By RainyEyes
What are you wiring that requires 10 FEET of...

What are you wiring that requires 10 FEET of wiring?

I can easily get away with 2 feet per colour per gun depending if it's front or rear wired. And that's with rewiring the gearbox. Try to...
Forum: Newbie Tank January 11th, 2019, 20:50
Replies: 2
Views: 953
Posted By RainyEyes
JG mp5's are a clone of the TM mp5's which mean...

JG mp5's are a clone of the TM mp5's which mean that it is a 3 piece receiver where the gearbox goes into the grip and the upper receiver splits into 2 pieces and sandwiches the thing to make a whole...
Forum: Airsoft Guns Discussion January 1st, 2019, 23:09
Replies: 13
Views: 1,918
Posted By RainyEyes
You guys know you don't have to make separate...

You guys know you don't have to make separate accounts. There's a section for retailers if you want to advertise...
Forum: Frequently Asked Questions January 1st, 2019, 17:30
Replies: 117
Views: 202,715
Posted By RainyEyes
Even if you were born in 1998 it's 2019 now so...

Even if you were born in 1998 it's 2019 now so you're at least 18 by now. And even if you really were born 1998 that would mean you were like 9 at most when you created your account and met with...
Forum: General December 26th, 2018, 23:37
Replies: 6
Views: 2,040
Posted By RainyEyes
Im surprise you're able to browse. The...

Im surprise you're able to browse.

The search engine is abysmal and anything you type brings up pretty much anything under the sun.

In my past few years as a "customer" I've never had something...
Forum: Doctor's Corner December 21st, 2018, 03:38
Replies: 5
Views: 1,556
Posted By RainyEyes
http://oi62.tinypic.com/2cxyblx.jpg This was...

http://oi62.tinypic.com/2cxyblx.jpg

This was my fix. It held the gearbox in place just fine but i definitely could have done better if the tolerances were right. The metal i used was this really...
Forum: Doctor's Corner December 21st, 2018, 02:49
Replies: 5
Views: 1,556
Posted By RainyEyes
Depending on what materials you have, you'll need...

Depending on what materials you have, you'll need a combination of bendable sheet metal and epoxy. Got a pic of the damage? That will tell you how salvageable the parts are and what elbow grease and...
Forum: Newbie Tank December 12th, 2018, 18:26
Replies: 2
Views: 1,516
Posted By RainyEyes
You can't post in classifieds except if you're...

You can't post in classifieds except if you're the thread author. This is to prevent post bumping. Direct message them instead.
Forum: Doctor's Corner December 10th, 2018, 00:12
Replies: 9
Views: 3,509
Posted By RainyEyes
I fixed my problem by swapping out the bucking as...

I fixed my problem by swapping out the bucking as others have stated. Same problem, no matter what spring i swapped it would stay at a steady 230-250 FPS.

Do not use the G&G Green buckings. Try a...
Forum: Gear Discussion December 3rd, 2018, 18:29
Replies: 2
Views: 1,371
Posted By RainyEyes
Cufoff lever. AR just stops the gears from...

Cufoff lever. AR just stops the gears from rolling backwards and pushing the motor backwards as well. The cutoff is the thing you need to look at along with the selector plate.
Forum: Newbie Tank November 20th, 2018, 20:54
Replies: 6
Views: 1,713
Posted By RainyEyes
You guys didn't need to make a new thread about...

You guys didn't need to make a new thread about this. There's already an existing thread about it:
https://www.airsoftcanada.com/showthread.php?t=77901&page=84
Showing results 1 to 50 of 500

 
Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 14:45.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.